Specification

Specifications table for model ER-X001
ItemPerformance characteristics
CE Marking Compliant DirectivesEMC Directive, RoHS Directive
Effective charge removal width50 mm 1.969 in approx.
Charge Removal Time0.3 sec. or less (Note 1), 0.5 sec. or less (Note 2)
(Note 1: Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and air supply 60 ℓ / min. (0.3 MPa)) .
(Note 2: Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.)
Ion balance±30 V or less
(Note 1:Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
(Note 2: Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)
Discharge methodPulse AC method
(Note:The discharge frequencies of 50 Hz, 20 Hz are accepted.)
Discharge frequency50 Hz / 20 Hz
Discharge output voltage±7,000 V approx.
Ozone generation0.01 ppm or less
(Note:Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.)
Maximum air pressure0.5 MPa
Applicable FluidAir (dried clean air)
(Note:The dried clean air is the air dried (dew point: equivalent of -20 ℃ -4 ℉) and filtered (mesh-size: equivalent of 0.01 μm) .)
Operating altitude2,000 m 6561.68 ft or less
(Note:Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)
Ambient Temperature0 to +40 ℃ +32 to +104 ℉ (No dew condensation), Storage: -10 to +65℃ +14 to +149℉
Ambient Humidity35 to 65 % RH, Storage: 35 to 85 % RH
Vibration resistance10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure earthingFloating
MaterialMain unit enclosure: Stainless steal (SUS)
Head mounting bracket: Stainless steal (SUS)
Discharge needle: PFA, Tungsten
Length of high-voltage cable1.2 m 3.937 ft
Weight (Typ.)Net weight : 370 g approx.
AccessoriesHead mounting bracket (installed at the time of factory shipment)

Stock Check

Stock check for product ER-X001
DistributorQuantityInventory Date
No stock found

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.