ANPV0202ADP

ANPV0202ADP design engineers Panasonic

Part No: ANPV0202ADP

Specifications

ItemPerformance characteristics
[[General specifications]]Rated operating voltage24 V DC
[[General specifications]]Operating voltage range21.6 to 26.4 V DC (including ripples)
[[General specifications]]Rated current consumption1.2 A max.
[[General specifications]]Ambient temperature during use0 to +45 ℃ 32 to +113 ℉ (However, no condensation or no freezing)
[[General specifications]]Storage ambient temperature-20 to +60 ℃ -4 to +140 ℉ (However, no condensation or no freezing)
[[General specifications]]Ambient humidity during use35 to 85 % RH (at 25 ℃ 77 ℉, However, no condensation or no freezing)
[[General specifications]]Storage ambient humidity35 to 85 % RH (at 25 ℃ 77 ℉, However, no condensation or no freezing)
[[General specifications]]Noise immunity1,000 V, Pulse width: 50 ns, 1 μs (using the noise simulator method)
[[General specifications]]Vibration resistance10 to 55 Hz, 1 sweep/min, double amplitude of 0.75 mm 0.03 in, 30 minutes each in the X, Y, and Z directions
[[General specifications]]Shock resistance196 m/s2, 5 times each in the X, Y and Z directions
[[General specifications]]Insulation resistance (initial value)100 MΩ or higher (measured by a 500 V DC megger) *1
Input and output terminals -- Power and ground terminals
Input and output terminals -- Non-energized metal part
Power terminal -- Non-energized metal part
*1 : The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.
[[General specifications]]Breakdown voltage (initial value)500 V AC for 1 min (600 V AC for 1 sec), Cutoff current: 10 mA *1
Input and output terminals -- Power and ground terminals
Input and output terminals -- Non-energized metal part
Power terminal -- Non-energized metal part
*1 : The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.
[[General specifications]]Battery life10 years approx. (at 25 ℃ 77 ℉)
[[General specifications]]Weight0.5 kg approx. (including terminal blocks)
[[General specifications]]Pollution degree2
[[Functional specifications]]CPU32-bit, RISC CPU & DSP
[[Functional specifications]]Input/output : CamerasUp to two cameras selected from among 0.3M grey/grey compact/color cameras (640 x 480), 0.3M color compact camera (640 x 478) and 2M grey/color cameras (1,600 x 1,200) can be connected.
Up to two 4M grey cameras can be connected. *1
*1 : The 4M grey camera cannot be used in combination with another type of camera.The ANPVC82□ dedicated compact camera cable is required to connect the compact cameras.
[[Functional specifications]]Input/output : Monitor outputAnalog RGB (640 x 480) output
[[Functional specifications]]Input/output : Memory cardSD/SDHC memory card
[[Functional specifications]]Input/output : PLC communication compatible models (RS232C)Panasonic Industrial Devices SUNX : FP series
OMRON : C, CV, and CS1 series
Mitsubishi Electric : A, Q, FX, and FX2N series
Fuji Electric : MICREX-SX SPH series
Allen-Bradley : SLC500 series
Modbus RTU compatible (performance confirmed with Siemens S7-1200)
[[Functional specifications]]Input/output : PLC communication compatible models (Ethernet)Panasonic Industrial Devices SUNX : FP series, ET-LAN unit
Mitsubishi Electric : Q series
Yokogawa Electric : FA-M3 series
[[Functional specifications]]Input/output : PLC communication commandSpecifiable external command instruction using PLC communication Command input format: polling / parallel input
[[Functional specifications]]Input/output : Parallel14 inputs / 15 outputs
[[Functional specifications]]Input/output : Keypad inputConnector for dedicated keypad (ANPVP**), 1 channel
[[Functional specifications]]Input/output : USBUSB 2.0, A-B type (Only PVWIN200)
[[Functional specifications]]Menu displayFour languages (five fonts), Switchable (Japanese, English, Korean, Traditional Chinese and Simplified Chinese)
[[Functional specifications]]Monitor displaySplit-screen display of up to two camera images, Zoom function (2 to 400%)
Image display: Through/Memory/NG object images
Display effects: Greyscale/Slice level group/Preprocessing group/Color/Extraction and binary/Grey conversion image
Display area (640 x 480)
[[Functional specifications]]Processing methodsGreyscale processing/Thresholding processin/Color extraction/Grey conversion
[[Functional specifications]]Processing resolution2M camera (grey/color): 1,600 horizontal x 1,200 vertical pixels
0.3M camera (grey/grey compact/color): 640 horizontal x 480 vertical pixels
0.3M camera (color compact): 640 horizontal x 478 vertical pixels
4M camera (grey): 2,048 horizontal x 2,048 vertical pixels
[[Functional specifications]]Trigger inputSelect from: All cameras or detection trigger
[[Functional specifications]]Number of connected camerasUp to two cameras
[[Functional specifications]]Camera connectionConnection by Power Over Camera Link (PoCL)
[[Functional specifications]]Capture methodFrame shooting only. Capable of partial capture of one point
In partial capture mode, the minimum capture area to be set for the 0.3M/4M camera is one line, and that for the 2M camera is 100 lines.
(The area can be set in increments of one line for the grey camera, and two lines for the color camera.)
[[Functional specifications]]Shutter speed30 μs to 1,000 ms (Set in increments of 10 μs)
However, 0.3M grey compact camera is 100μs to 500 ms (Set in increments of 10μs)
[[Functional specifications]]Gain setting range1.0 to 5.0
[[Functional specifications]]No. of product types256 types max. (depends on setting data)
[[Functional specifications]]PasswordSwitching from the current operating screen to the setup screen can be password controlled (within 15 characters).
Administration classification: invalid/valid (limit setting screen transition and limit regular menu switching)
[[Functional specifications]]Inspection functions (Checkers)1,000 checkers/product type max., including those for geometry calculation and character/figure drawing (depends on setting data)
Position adjustment, Position rotation adjustment, Rotation adjustment area size adjustment, Line, Binary window, Grey window, Binary edge, Grey edge, Feature extraction, Smart matching, Contour matching, Flaw detection, Connector (binary window), Connector (grey window), Connector (grey edge), Smart edge (circles), Smart edge (line), Color window
* Number of range masks: 16 ranges/checker
* Maximum registrable number of smart matching and contour matching templates: 2,000 pcs.
[[Functional specifications]]Geometry calculation1,000 checkers/product type max., including those for inspection functions and character/figure drawing (depends on setting data)
Eight calculation functions (distance between two points, intersection of two lines, median lines of two lines, perpendicular distance, approximate straight line, approximate circle, and approximate ellipse)
[[Functional specifications]]Character/Figure drawingUp to 10,000 characters/graphics (1,000 checkers x 10)/product type can be displayed on the images (depends on setting data).
[[Functional specifications]]Inspection operation modeSequential processing: After completing the result output, the next image capture for inspection can be started.
Parallel processing: After the capture and the synchronized output of results of the previous inspection are completed, the image capture process for the next inspection is ready to start, and then the capture and inspection results output are processed concurrently.
[[Functional specifications]]Slice level group16 group/camera, 256-grey scale (0 to 255)
[[Functional specifications]]Image preprocessPreprocessing selections: Grey conversion / Color extraction / Grey preprocessing

[Grey conversion]
Available only when a color camera is connected. For each product type, 16 groups/camera
Each R/G/B value setting for grey conversion can be changed within the range of -1,000 to 1,000.

[Color extraction]
Available only when a color camera is connected. Color extraction mode: Selectable between high speed and expansion
Number of extractable colors; High speed: A total of 16 colors when one camera is connected and eight colors when two cameras are connected.
Expansion: A total of 128 colors when one camera is connected and 64 colors when two cameras are connected.
Only eight registered colors can be selected from one checker.

[Grey preprocessing]
For each product type, 16 groups/camera, 10 stages max.
Preprocessing filters: 21 types
(Dilation, Erosion, Erosion → Dilation, Dilation → Erosion, Auto correction, Grey cut, Area averaging, Correction settings, Median, Smoothing, Sobel, Prewitt, Laplacian, Edge extraction X, Edge extraction Y, Sharpen, Tophat, Dynamic, Grey difference, Rotation, and Reflect)
[[Functional specifications]]Numerical calculation1,000 formulas/product type max., including those for judgement output (depends on setting data)
Calculations involving output values of inspection functions

[Operators]
Four fundamental operations (+, -, x, ÷), Bracket operations, Trigonometric functions (14 types), Comparison functions (6 types), Math functions (15 types), Geometry functions (18 types), Coordinate conversion functions (8 types)

[Statistic data operation items]
Scan count/OK count/NG count/Average/Variance/Max./Min./Range/OK average/OK variance/OK judgment max./OK judgment min./OK range/NG average/NG variance/NG judgment max./NG judgment min./NG range User limit: 1,000 items /product type max.

[Other operation items]
Previous data of numerical calculation and judgment results, general-purpose registers

[Number of reference operators]
16 items/formula max.
[[Functional specifications]]Judgement output1,000 formula/product type max., including those for numerical calculation (depends on setting data)
Substitution for and logical calculation of judgement results from checkers and numerical calculations

[Operators]
NOT/AND/OR/XOR/Brackets

[Number of reference items]
16 items/formula max.

[Others]
Total judgment conditions, save image conditions, Image output conditions, parallel output setting (8 outputs from OUT0 to OUT7 and 16 outputs from OUT0 to OUT15, or all setting output)
[[Functional specifications]]Collective movingCollective movement of set checkers in units of position/rotation adjustment groups
Specify the "Move" or "Not move" option for each checker type.
However, position and rotation adjustment checkers cannot be moved.
[[Functional specifications]]Marker8 markers/product type max. for each camera, Graphic display on the operation screen, Selectable from six colors
[Shapes]
Rectangle/Circle, Ellipse/Polygon/Line/Cross
[[Functional specifications]]Data R/WTwo-window display of up to 80 (5x16) cells/product type on screen in table form in RUN mode
Substitution of title input, checker conditions/results, numerical calculation results, numerical calculation judgment results, judgment results, statistical results possible. Change of upper/lower limits of numerical computation in the table in RUN mode possible.
[[Functional specifications]]Select menuMaximum registrable number of arbitrary setup items in setup screen on menu: 16 items x 50 pages/type.

[Registration information]
Button / Text / Page move / Separator

[Button allocation method]
FUNC key for item / Selection from list

[Others]
Page name registration possible
[[Functional specifications]]CalibrationCoordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions for each product type.

[Processing method]
Unit conversion / 1 point coordinate conversion / 2 point coordinate conversion / 3 points coordinate conversion

[Operation method]
Static / Dynamic

[Standard registration]
Arbitrary position / Smart matching / Contour matching / Intersection / Centre of circle / Feature extraction
[[Functional specifications]]Conversion dataCoordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions.

[Others]
Comment input
[[Functional specifications]]Template re-registration settings[Position]
Set position/Adjusted position

[Display]
Yes/No
[[Functional specifications]]Execution mode[Normal execution]
Execution of all checkers

[Branch execution]
Destination blocks (0 to 9) can be set.

[Designated execution]
Blocks to be executed (0 to 9) can be set.

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Industrial Automation › Factory Automation Devices › Machine Vision Systems › PV200 › ANPV0202ADP › Data sheetData Sheet
Industrial Automation › Factory Automation Devices › Machine Vision Systems › PV200 › ANPV0202ADP › ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]
Industrial Automation › Factory Automation Devices › Machine Vision Systems › PV200 › ANPV0202ADP › ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]
Industrial Automation › Factory Automation Devices › Machine Vision Systems › PV200 › ANPV0202ADP › ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]
Industrial Automation › Factory Automation Devices › Machine Vision Systems › PV200 › ANPV0202ADP › ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]
Industrial Automation › Factory Automation Devices › Machine Vision Systems › PV200 › ANPV0202ADP › ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]ANPV0202ADP / ANPV0232ADP / ANPV0242ADP / ANPV0262ADP [Controller unit]
Industrial Automation › Factory Automation Devices › Machine Vision Systems › PV200 › ANPV0202ADP › PV200PV200