EC-G02
Specification
| Item | Performance characteristics |
|---|---|
| CE Marking Compliant Directives | EMC Directive, RoHS Directive |
| Charge Removal Time | 0.5 sec. or less approx. (±1,000 V → ±100 V) (Note):Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa. |
| Applicable Fluid | Air (dried clean air) (Note):Dried clean air is the air passing through air dryer (dew point -20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.) |
| Supplied Air Flow | 300 ℓ/min. (ANR) or less |
| Air Pressure Range | 0.05 to 0.50 MPa |
| Supply Voltage | Accessory AC adapter INPUT: 100 - 240 V AC ±10 % 50/60 Hz (OUTPUT: 24 V DC) |
| Power Consumption | 30 VA or less |
| Discharge Method | High-frequency AC method |
| Pulse Air Mode | Pulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switch |
| LED Illumination Mode | ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF) |
| External Input | Ionized air emission operation ON / OFF using OR control with trigger switch Ionized air emission operation ON: Short-circuited to COM (-) Ionized air emission operation OFF: Open |
| Ambient Temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), AC adapter: 0 to +40 ℃ +32 to +104 ℉ |
| Ambient Humidity | 35 to 65 % RH (No dew condensation allowed) |
| Weight (Typ.) | 270 g approx. (main unit only) |
| Accessories | AC adapter: 1pc. Exclusive intermediate cable (oil-resistant, heat-resistant, bending-resistant type) length 2m 6.562 ft: 1 pc. Straight joints ・Tube outer diameter ø8-ø8mm ø0.315-ø0.315 in compatible type: 1 pc. (Note):At the time of shipment from the factory, ø8-ø8mm ø0.315-ø0.315 in type is attached. ・Tube outer diameter ø8-ø6mm ø0.315-ø0.236 in compatible type: 1 pc. Connector connection terminal (Manufactured by Molex): 3 pcs. |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
Stock Check
Important
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.
