Static Control Devices: Pulse Air-gun Ionizer EC-G

Model List

Found 1 matches. Display 1 - 1 matches.
Part No.sort descendingData SheetCE marking compliant directivesCharge removal timeApplicable fluidSupplied air flowAir pressure rangeSupply voltagePower consumptionDischarge methodPulse air modeLED illumination modeParts Inventory
   Column active Filter
Close

Filter by CE marking compliant directives

Column active Filter
Close

Filter by Charge removal time

Column active Filter
Close

Filter by Applicable fluid

Column active Filter
Close

Filter by Supplied air flow

Column active Filter
Close

Filter by Air pressure range

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Power consumption

Column active Filter
Close

Filter by Discharge method

Column active Filter
Close

Filter by Pulse air mode

Column active Filter
Close

Filter by LED illumination mode

 
design engineersPanasonicEC-G02
EMC Directive, RoHS Directive0.5 sec. or less approx. (±1,000 V → ±100 V)
(Note):Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa.
Air (dried clean air)
(Note):Dried clean air is the air passing through air dryer (dew point -20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.)
300 ℓ/min. (ANR) or less0.05 to 0.50 MPaAccessory AC adapter INPUT: 100 - 240 V AC ±10 % 50/60 Hz
(OUTPUT: 24 V DC)
30 VA or lessHigh-frequency AC methodPulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switchON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF)