Part Number List

Results 4
Models table for series Digital Fiber Sensor FX-550
Part No.DatasheetCE Marking Directive ComplianceSupply voltagePower consumptionOutputOutput:Output operationOutput:Short-circuit protectionResponse timeSensitivity settingIncident light sensitivity settingIncident light intensity display rangeTimer functionTimer function:Timer periodDifferent frequency interference prevention functionProtectionAmbient TemperatureEmitting element (modulated)MaterialCableCable ExtensionWeight (Typ.)Remark
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
Net weight : 55 g approx., Gross weight : 90 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
-
-
Net weight : 15 g approx., Gross weight : 55 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
Net weight : 55 g approx., Gross weight : 90 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
-
-
Net weight : 15 g approx., Gross weight : 55 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.