Part Number List

Results 4
Models table for series Digital Mark Sensor LX-100
Part No.DatasheetCE Marking Directive ComplianceSensing rangeSpot sizeSupply voltageCurrent consumptionOutput 1(OUT)Output 1:Short-circuit protectionOutput 1:Output operationOutput 2(OUT)Output 2:Short-circuit protectionOutput 2:Output operationResponse timeTeaching inputDigital displaySensitivity settingFine sensitivity adjustment functionTimer functionProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage withstandabilityVibration resistanceShock resistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)Accessory
EMC Directive, RoHS Directive
10 ± 3 mm 0.394 ± 0.118 in
1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 50 mA sink current)
Incorporated
Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 50 mA sink current)
Incorporated
Inverted operation of the output 1
Mark mode: 45 micro s or less
Color mode: 150 micro s or less
NPN non-contact input
- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)
- Input impedance: 10 kOhm approx.
4-digit red LED display
Mark mode: 2-level teaching / Full-auto teaching
Color mode: 1-level teaching
Incorporated
Incorporated with variable ON-delay / OFF-delay timer,
switchable either effective or ineffective
(Timer period: 1 to 500 ms, 9 levels variable)
IP67 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
Enclosure: PBT
Display cover: Polycarbonate
Operation buttons: Silicone rubber
Lens: Glass
Lens holder: Aluminum
0.34 mm2 5-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 120 g approx
Gross weight: 180 g approx
M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
EMC Directive, RoHS Directive
10 ± 3 mm 0.394 ± 0.118 in
1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 50 mA source current)
Incorporated
Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 50 mA source current)
Incorporated
Inverted operation of the output 1
Mark mode: 45 micro s or less
Color mode: 150 micro s or less
PNP non-contact input
- Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open
- Input impedance: 10 kOhm approx.
4-digit red LED display
Mark mode: 2-level teaching / Full-auto teaching
Color mode: 1-level teaching
Incorporated
Incorporated with variable ON-delay / OFF-delay timer,
switchable either effective or ineffective
(Timer period: 1 to 500 ms, 9 levels variable)
IP67 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
Enclosure: PBT
Display cover: Polycarbonate
Operation buttons: Silicone rubber
Lens: Glass
Lens holder: Aluminum
0.34 mm2 5-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 120 g approx
Gross weight: 180 g approx
M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
EMC Directive, RoHS Directive
10 ± 3 mm 0.394 ± 0.118 in
1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA source current)
Incorporated
Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
-
-
-
Mark mode: 45 micro s or less
Color mode: 150 micro s or less
PNP non-contact input
- Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open
- Input impedance: 10 kOhm approx.
4-digit red LED display
Mark mode: 2-level teaching / Full-auto teaching
Color mode: 1-level teaching
Incorporated
Incorporated with variable ON-delay / OFF-delay timer,
switchable either effective or ineffective
(Timer period: 1 to 500 ms, 9 levels variable)
IP67 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
Enclosure: PBT
Display cover: Polycarbonate
Operation buttons: Silicone rubber
Lens: Glass
Lens holder: Aluminum
(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 55 g approx.
Gross weight: 120 g approx.
M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
EMC Directive, RoHS Directive
10 ± 3 mm 0.394 ± 0.118 in
1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Incorporated
Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
-
-
-
Mark mode: 45 micro s or less
Color mode: 150 micro s or less
NPN non-contact input
- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)
- Input impedance: 10 kOhm approx.
4-digit red LED display
Mark mode: 2-level teaching / Full-auto teaching
Color mode: 1-level teaching
Incorporated
Incorporated with variable ON-delay / OFF-delay timer,
switchable either effective or ineffective
(Timer period: 1 to 500 ms, 9 levels variable)
IP67 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
Enclosure: PBT
Display cover: Polycarbonate
Operation buttons: Silicone rubber
Lens: Glass
Lens holder: Aluminum
(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 55 g approx.
Gross weight: 120 g approx.
M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.