Part Number List

Results 8
Models table for series Adjustable Range Reflective Photoelectric Sensor EQ-500
Part No.DatasheetCE Marking Directive ComplianceAdjustable RangeSensing range(at maximum setting distance)HysteresisSupply voltagePower / current consumptionOutputOutput:Output operationOutput:Short-circuit protectionResponse timeOperation indicatorStability indicatorDistance adjusterSensing modeTimer functionAutomatic Interference Prevention FunctionProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage withstandabilityInsulation resistanceVibration resistanceShock resistanceEmitting ElementReceiving elementMaterialConnection methodCableCable LengthWeight (Typ.)Accessory
EMC Directive, RoHS Directive
0.2 to 1.0 m
0.656 to 3.281 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 1.0 m
0.328 to 3.281 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
45 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less (depends on the setting timer period)
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
Switchable either BGS or FGS function
Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 85 g approx.
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
0.2 to 2.5 m
0.656 to 8.202 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 2.5 m
0.328 to 8.202 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
45 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less (depends on the setting timer period)
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
Switchable either BGS or FGS function
Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 85 g approx.
Adjusting screwdriver: 1 pc.
Low Voltage Directive, EMC Directive, RoHS Directive
0.2 to 2.5 m
0.656 to 8.202 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 2.5 m
0.328 to 8.202 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
24-240 V AC ±10 % or 12 to 240 V DC ±10 %
Ripple P-P 10 % or less
AC: 4 VA or less
DC: 3 W or less
Relay contact 1a
- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)
- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)
- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour)
Switchable either Detection-ON or Detection-OFF
-
20 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
-
-
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts
100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 100 g approx.
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
0.2 to 1.0 m
0.656 to 3.281 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 1.0 m
0.328 to 3.281 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
45 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
Switchable either BGS or FGS function
-
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 85 g approx.
Adjusting screwdriver: 1 pc.
Low Voltage Directive, EMC Directive, RoHS Directive
0.2 to 1.0 m
0.656 to 3.281 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 1.0 m
0.328 to 3.281 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
24-240 V AC ±10 % or 12 to 240 V DC ±10 %
Ripple P-P 10 % or less
AC: 4 VA or less
DC: 3 W or less
Relay contact 1a
- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)
- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)
- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour)
Switchable either Detection-ON or Detection-OFF
-
20 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
-
-
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts
100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 100 g approx.
Adjusting screwdriver: 1 pc.
Low Voltage Directive, EMC Directive, RoHS Directive
0.2 to 2.5 m
0.656 to 8.202 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 2.5 m
0.328 to 8.202 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
24-240 V AC ±10 % or 12 to 240 V DC ±10 %
Ripple P-P 10 % or less
AC: 5 VA or less
DC: 4 W or less
Relay contact 1a
- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)
- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)
- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour)
Switchable either Detection-ON or Detection-OFF
-
20 ms or less (depends on the setting timer period)
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
-
Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts
100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 100 g approx.
Adjusting screwdriver: 1 pc.
Low Voltage Directive, EMC Directive, RoHS Directive
0.2 to 1.0 m
0.656 to 3.281 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 1.0 m
0.328 to 3.281 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
24-240 V AC ±10 % or 12 to 240 V DC ±10 %
Ripple P-P 10 % or less
AC: 5 VA or less
DC: 4 W or less
Relay contact 1a
- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)
- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)
- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour)
Switchable either Detection-ON or Detection-OFF
-
20 ms or less (depends on the setting timer period)
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
-
Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts
100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 100 g approx.
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
0.2 to 2.5 m
0.656 to 8.202 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
0.1 to 2.5 m
0.328 to 8.202 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
45 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable operating condition)
2-turn mechanical adjuster with indicator
Switchable either BGS or FGS function
-
Incorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
IP67 (IEC)
–20 to +55 ℃ –4 to +131 (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 Lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
2-segment photodiode
Enclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Screw-on terminal connection
Suitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
Net weight: 85 g approx.
Adjusting screwdriver: 1 pc.