Specification

Specifications table for model CX-421-C05
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Sensing Range 300 mm 11.811 in
(Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object.
Sensing Object Opaque, translucent or transparent object
(Note) Make sure to confirm detection with an actual sensor before use.
Repeatability (Perpendicular to Sensing Axis) 1 mm 0.039 in or less
Hysteresis15 % or less of operation distance
(Note) The sensing range and hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object.
Supply Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current Consumption13 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output: Output Operation Switchable either Light-ON or Dark-ON
Output: Short-Circuit ProtectionIncorporated
Response Time1 ms or less
Operation Indicator Orange LED(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability IndicatorGreen LED(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power Indicator -
Sensitivity AdjusterContinuously variable adjuster(incorporated on the receiver for thru-beam type)
Automatic Interference Prevention FunctionIncorporated(Two units of sensors can be mounted close together.)
ProtectionIP67 (IEC)
Ambient Temperature- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock Resistance500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting Element (Modulated)Infrared LED
Emitting Element (Modulated): Peak Emission Wavelength860 nm 0.034 mil
MaterialEnclosure: PBT (polybutylene terephthalate)
Lens: acrylic
Indicator cover: acrylic
Cable0.2 mm23-core cabtyre cable, 0.5 m 1.640 ft long
Cable ExtensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Accessory-

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.