Specification

Specifications table for model EX-11SB
ItemPerformance characteristics
Sensing Range 150 mm 5.906 in
Min. Sensing Objectdia. 0.5 mm dia. 0.020 in opaque object (Completely beam interrupted object)
(Note) : The min. sensing objects are specified in case the emitter / reciever sensing range is to set the maximum.
Hysteresis-
Repeatability (Perpendicular to Sensing Axis) 0.05 mm 0.002 in or less
Supply Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current ConsumptionEmitter: 10 mA or less
Receiver: 10 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
Output: Utilization Category DC-12 or DC-13
Output: Short-Circuit ProtectionIncorporated
Response Time0.5 ms or less
Operation Indicator Orange LED (lights up when the output is ON)
Incident Beam Indicator-
Stability IndicatorGreen LED (lights up under stable light received condition or stable dark condition)
Pollution Degree 3 (Industrial environment)
ProtectionIP67 (IEC)
Ambient Temperature-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,000 lx at the light-receiving face
EMCEN 60947-5-2
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting ElementRed LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
MaterialEnclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable ExtensionExtension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Weight (Typ.)Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
AccessoryMounting screws: 1 set
CE Marking Directive Compliance・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
CertificationUL certification

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.