|CE Marking Directive Compliance||EMC Directive, RoHS Directive|
|Sensing Range||5 to 160 mm 0.197 to 6.299 in (Note) with white non-glossy paper (200 x 200 mm) (7.874 x 7.874 in)|
(Note) In case of using this product at a sensing range of 50 mm 1.969 in or less, take care that the sensitivity adjustment range becomes extremely narrow.
|Sensing Object||Opaque,translucent or transparent object|
(Note) Make sure to confirm detection with an actual sensor before use.
|Hysteresis||15 % or less of operation distance [200 x 200 mm 7.874 x 7.874 in with white non-glossy paper]|
|Repeatability (Perpendicular to Sensing Axis)||0.3 mm 0.012 in or less|
|Supply Voltage||12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less|
|Current Consumption||13 mA or less|
|Output||NPN open-collector transistor|
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
|Output: Utilization Category||DC-12 or DC-13|
|Output: Short-Circuit Protection||Incorporated|
|Response Time||0.5 ms or less|
|Operation Indicator||Orange LED (lights up when the output is ON)|
|Stability Indicator||Green LED (lights up under stable light received condition or stable dark condition)|
|Operation Mode Switch||-|
|Sensitivity Adjuster||Continuously variable adjuster|
|Ambient Temperature||-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit|
|Ambient Humidity||35 to 85 % RH, Storage: 35 to 85 % RH|
|Ambient Illuminance||Incandescent light: 3,000 lx or less at the light-receiving face|
|Voltage Withstandability||1,000 V AC for one min. between all supply terminals connected together and enclosure|
|Insulation Resistance||20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure|
|Vibration Resistance||10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each|
|Shock Resistance||500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each|
|Emitting Element||Red LED (modulated)|
|Emitting Element: Peak Emission Wavelength||680 nm 0.027 mil|
|Material||Enclosure: Polyethylene terephthalate|
|Cable||0.1 mm2 3-core cabtyre cable, 5 m 16.404 ft long|
|Cable Extension||Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.|
|Accessory||Adjusting screwdriver: 1 pc|
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.