Light Curtains: Compact Type 4 Safety Beam Sensor ST4

Model List

Found 6 matches. Display 1 - 6 matches.
Part No.sort descendingData SheetApplicable standardsCE marking directive complianceOperating rangeSensing objectEffective aperture anglePower voltageCurrent consumptionBeam interruption indicatorBeam emission indicatorStable incident beam indicatorParts Inventory
   Column active Filter
Close

Filter by Applicable standards

Column active Filter
Close

Filter by CE marking directive compliance

Column active Filter
Close

Filter by Operating range

Column active Filter
Close

Filter by Sensing object

Column active Filter
Close

Filter by Effective aperture angle

Column active Filter
Close

Filter by Power voltage

Column active Filter
Close

Filter by Current consumption

Column active Filter
Close

Filter by Beam interruption indicator

Column active Filter
Close

Filter by Beam emission indicator

Column active Filter
Close

Filter by Stable incident beam indicator

 
design engineersPanasonicST4-A1-J1
IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 7 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)
(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX.
Machinery Directive, EMC Directive, RoHS Directive0.1 to 15 m 0.328 to 49.213 ft
(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.)
φ9 mm φ0.354 in or more opaque objectplus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2)Supplied from controllerEmitter: 11 mA or less
Receiver: 9 mA or less
Red LED (lights up when the beam is interrupted or lock out, lights off during reception)
(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output.
Green LED (lights up during beam emission, lights off during emission halt)Green LED (lights up under stable light received condition, lights off under unstable light received condition)
design engineersPanasonicST4-C11
IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 7 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)
(Note) Complies with those standards only when the controller is used in combination with the sensor head ST4-x.
Machinery Directive, EMC Directive, RoHS Directiven/an/an/a24 V DC +10-15 % Ripple P-P 10 % or less100 mA or less (excluding sensor head ST4-Ax)n/an/an/a
design engineersPanasonicST4-C12EX
IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 7 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)
(Note) Complies with those standards only when the controller is used in combination with the sensor head ST4-x.
Machinery Directive, EMC Directive, RoHS Directiven/an/an/a24 V DC +10-15 % Ripple P-P 10 % or less120 mA or less (excluding sensor head ST4-Ax)n/an/an/a
design engineersPanasonicST4-A1-J02V
IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 7 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)
(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX.
Machinery Directive, EMC Directive, RoHS Directive0.1 to 15 m 0.328 to 49.213 ft
(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.)
φ9 mm φ0.354 in or more opaque objectplus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2)Supplied from controllerEmitter: 11 mA or less
Receiver: 9 mA or less
Red LED (lights up when the beam is interrupted or lock out, lights off during reception)
(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output.
Green LED (lights up during beam emission, lights off during emission halt)Green LED (lights up under stable light received condition, lights off under unstable light received condition)
design engineersPanasonicST4-A1-J02
IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 7 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)
(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX.
Machinery Directive, EMC Directive, RoHS Directive0.1 to 15 m 0.328 to 49.213 ft
(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.)
φ9 mm φ0.354 in or more opaque objectplus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2)Supplied from controllerEmitter: 11 mA or less
Receiver: 9 mA or less
Red LED (lights up when the beam is interrupted or lock out, lights off during reception)
(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output.
Green LED (lights up during beam emission, lights off during emission halt)Green LED (lights up under stable light received condition, lights off under unstable light received condition)
design engineersPanasonicST4-A1-J1V
IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 7 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)
(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX.
Machinery Directive, EMC Directive, RoHS Directive0.1 to 15 m 0.328 to 49.213 ft
(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.)
φ9 mm φ0.354 in or more opaque objectplus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2)Supplied from controllerEmitter: 11 mA or less
Receiver: 9 mA or less
Red LED (lights up when the beam is interrupted or lock out, lights off during reception)
(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output.
Green LED (lights up during beam emission, lights off during emission halt)Green LED (lights up under stable light received condition, lights off under unstable light received condition)