PD60/PD65

Models table for series PD60/PD65
Part No.	Rated Operating Voltage	Operating Voltage Range	Rated Current Consumption	Ambient Temperature During Use	Storage Ambient Temperature	Ambient Humidity During Use	Storage Ambient Humidity	Noise Immunity	Vibration Resistance	Shock Resistance	Insulation Resistance (Initial Value)	Breakdown Voltage (Initial Value)	General Specifications: Protective Construction	Weight (Typ.)	Main Unit: Type	Main Unit: Light Configuration	Main Unit: Read Method	Main Unit: Image Capture Element	Main Unit: Valid Pixels	Main Unit: Image Capture Light Source	Main Unit: Image Capture Light Source: Expected Life	Main Unit: Image Capture Light Source: Exposure Time	Main Unit: Visual Pilot Beam	Main Unit: Input/Output: Parallel	Main Unit: Input/Output: Parallel: Input	Main Unit: Input/Output: Parallel: Output	Main Unit: Input/Output: Serial	Main Unit: Input/Output: USB	Main Unit: Input/Output: USB: PC I/P	Main Unit: Input/Output: USB: Supported OS	Application Software: Detection Capability	Application Software: Total Processing Time	Application Software: No. Of Registered Items	Application Software: Type Registration Method	Application Software: Serial : Input	Application Software: Serial : Output	Application Software: Parallel : Input	Application Software: Parallel : Output	2D Code Reading: Readable Code Type: QR Code	2D Code Reading: Readable Code Type: Data Matrix (ECC200)
ANPD060-20	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-25	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-30	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060S25	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD065-25	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 700 g (Note) Weight includes power supply I/O cable.	Handy Type	Dual Side/Diffused Lighting	Trigger button	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-12	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-15	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-02	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-04	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-06	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.

Models table for series PD60/PD65
Part No.	Rated Operating Voltage	Operating Voltage Range	Rated Current Consumption	Ambient Temperature During Use	Storage Ambient Temperature	Ambient Humidity During Use	Storage Ambient Humidity	Noise Immunity	Vibration Resistance	Shock Resistance	Insulation Resistance (Initial Value)	Breakdown Voltage (Initial Value)	General Specifications: Protective Construction	Weight (Typ.)	Main Unit: Type	Main Unit: Light Configuration	Main Unit: Read Method	Main Unit: Image Capture Element	Main Unit: Valid Pixels	Main Unit: Image Capture Light Source	Main Unit: Image Capture Light Source: Expected Life	Main Unit: Image Capture Light Source: Exposure Time	Main Unit: Visual Pilot Beam	Main Unit: Input/Output: Parallel	Main Unit: Input/Output: Parallel: Input	Main Unit: Input/Output: Parallel: Output	Main Unit: Input/Output: Serial	Main Unit: Input/Output: USB	Main Unit: Input/Output: USB: PC I/P	Main Unit: Input/Output: USB: Supported OS	Application Software: Detection Capability	Application Software: Total Processing Time	Application Software: No. Of Registered Items	Application Software: Type Registration Method	Application Software: Serial : Input	Application Software: Serial : Output	Application Software: Parallel : Input	Application Software: Parallel : Output	2D Code Reading: Readable Code Type: QR Code	2D Code Reading: Readable Code Type: Data Matrix (ECC200)
ANPD060-20	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-25	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-30	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060S25	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD065-25	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 700 g (Note) Weight includes power supply I/O cable.	Handy Type	Dual Side/Diffused Lighting	Trigger button	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-12	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-15	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-02	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-04	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.
ANPD060-06	24 V DC	21.6 to 26.4 V DC (including ripples)	0.5 A max.	0 to +40degrees	–20 to +60degrees (no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	35 to 85%RH (at 25degrees no freezing or condensation)	1000 V pulse width 50 ns/1 micros (using noise simulator method)	10 to 55 Hz, 1 sweep/min. Double amplitude of 1.5 mm. 30 min. each in X, Y and Z directions	196 m/s2, 5 times each in X, Y and Z directions	Min. 100MOhm (with a 500 VDC isolation resistance tester) (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	500V AC/1 minute (600V AC/1 second) Cut-off current 10mA (Note) Parallel input/parallel output, parallel input/power, parallel input/functional earth, parallel output/power, parallel output/functional earth, power/functional earth. (Note) Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.	IP67G (Note) Evaluation was carried out with the USB cable not connected and the waterproof cap in place.	Approx: 500 g (Note) Weight includes power supply I/O cable.	Stationary Type	4 Control Sections	External Start, Auto start	Black/white C-MOS	352 horizontal x 288 vertical pixels (100,000 pixels)	White LED	Expected Life: Min. 30000 hours (until light intensity falls to 50%) (at 25degrees, internal trigger: ON, read time: 60ms, exposure time: 3ms)	Shutter timing and interlock (0.03 to 50 ms)	Red LED	Power I/O Cable	2 Photo-coupler Inputs (trigger: 1 bit, model switch: 1 bit)	3 PhotoMOS outputs (ready: 1 bit, alarm: 1 bit, OK/NG: 1 bit)	Power I/O cable (RS232C communication: Max. 57600 bit/s)	USB Cable (AB Type) Sold separately	USB1.1	Windows(R) Vista, XP, 2000, Me, 98SE	5 or more pixels per cell	30 ms to 200 ms	7 types	Teaching [settings related to codes to be decoded]	I/O Command: Trigger input, type switching (types 1 to 7) Teaching Command: Exposure time setting, and code setting(QR codes, data matrix)	Readability, readouts, error correction rate, and error output	Trigger input, type switching (types 1 to 7) mode switching (teaching/RUN)	Evaluation result (OK/NG), READY, Alarm	Model: Model 1 and Model 2 Matrix size: Model 1: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8),Model 2: 21 x 21 cells to 49 x 49 cells (Ver. 1 to 8) Error correction level: L (7%), M (15%), Q (25%), H (30%) Supports black/white reversed codes, horizontally-flipped codes, and dots. The model, matrix size, and the error correction level are automatically identified.	Matrix size: Square symbol: 10 x 10 cells to 44 x 44 cells matrix, Rectangular symbol: 8 x 18 cells, 8 x 32 cells,12 x 26 cells, 12 x 36 cells,16 x 36 cells, 16 x 48 cells Supports black/white reversed codes, horizontally-flipped codes, and dots. The matrix size is automatically identified.

PD60/PD65

Part Number List