Specification

Specifications table for model ADJH23005
ItemPerformance characteristics
Operating Function 2 coil latching
Type ClassificationStandard type (Without manual switch)
Rated Coil Voltage5 V DC
Protective ConstructionFlux-resistant
Terminal TypePC board terminal
Packing Quantity; Inner Carton (Pcs.) 50
Packing Quantity; Outer Carton (Pcs.)200
Set Voltage Max. 75% V of rated coil voltage (Initial)
Rated Operating Current [±10%] (at 20°C)Set coil: 400 mA
Reset coil: 400 mA
Reset VoltageMax. 75% V of rated coil voltage (Initial)
Resistance [±10%] (at 20°C) Set coil: 12.5 Ω
Reset coil: 12.5 Ω
Rated Operating Power 2,000 mW
Max. Allowable Voltage (at 20°C 68°F)130% V of rated coil voltage
Contact Arrangement1 Form A
Contact ShapeSingle
Contact Resistance (Initial)Max. 20 mΩ (by voltage drop 24 V DC 1 A)
Contact MaterialAgSnO2 type
Contact Rating (Resistive Load)50 A 277 V AC
Max. Switching Power (Resistive Load) 13,850 VA (50 A 277 V AC)
Max. Switching Voltage480 V AC
Max. Switching Current50 A (AC)
Min. Switching Load (Reference Value) 100 mA 5 V DC
Insulation Resistance (Initial)Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric Strength (Initial): Between Open Contacts1,500 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and Coil4,000 Vrms for 1 min (detection current: 10 mA)
Surge Withstand Voltage (Initial): Between Contact and Coil12,000 V
Time (Initial) (at 20°C 68°F) (Initial) Max. 20 ms at rated coil voltage (without bounce)
Reset Time (Initial) (at20°C 68°F) Max. 20 ms at rated coil voltage (without bounce)
Vibration Resistance (Functional)10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
Hock Resistance (Destructive)1,000 m/s2 (half-sine shock pulse: 6 ms)
Hock Resistance (Functional)100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Vibration Resistance (Destructive)10 to 55 Hz (at double amplitude of 2 mm)
Mechanical LifeMin. 106 ope. (switching frequency: at 180 times/min)
ConditionsAmbient temperature: -40 to +85°C (Allowable temperature is from -40 to +70°C at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Weight (Typ.)Approx. 31 g
Resistive Load[switching frequency ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 25 A 277 V AC
Min. 10x103 ope. 50 A 277 V AC
Inrush Load; Tungsten[switching frequency ON : OFF = 1 s : 59 s]
Min. 25x103 ope. 2,400 W 120 V AC
Inrush Load; Electronic Ballast [switching frequency ON : OFF = 1 s : 9 s]
Min. 6x103 ope. 20 A 277 V AC
Inrush Load; Capacitive (IEC 60669-1)[switching frequency ON : OFF = 1 s : 9 s]
Min. 30x103 ope. 20 A 250 V AC 200 µF

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date