DJ Series Relays

Panasonic’s DJ Series Polarized Power Relays are characterized by high switching capacity in a wide variety of contact arrangements, 1 Form A, 1 Form B, 1 Form C, 1 Form A 1 Form B, 2 Form A, 2 Form B, and 2 Form C. In addition, each one is available in 1-coil latching, 2-coil latching, or single side stable types. The DJ Series Relays are available with a test button option to facilitate circuit checks.

Features and Benefits

  • Compact With High Contact Rating
  • Variety Of Contact Arrangements
  • Latching Types Available
  • Low Power Consumption
  • Long Insulation Distance
  • Test Button For Operation Verification
  • Sealed Construction Option Allows Automatic Washing
  • UL, CSA, and TÃœV Compliant

Applications

  • Industrial Machine
  • Electric Power Devices
  • Household Appliance Networks
  • Time Switches

Part Number List

Results 205
Models table for series DJ Series Relays
Part No.DatasheetProtective ConstructionOperating Function Type ClassificationRated Coil VoltageRated Operating Power Contact ArrangementTerminal TypeInsulation DistancePacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Set Voltage Reset VoltageRated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Max. Allowable Voltage (at 20°C 68°F)Contact ShapeContact Resistance (Initial)Contact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilTime (Initial) (at 20°C 68°F) (Initial) Reset Time (Initial) (at20°C 68°F) Hock Resistance (Functional)Hock Resistance (Destructive) Vibration Resistance (Destructive)Vibration Resistance (Functional)Mechanical LifeConditionsWeight (Typ.)Resistive LoadOperate Voltage (@20oC)Release Voltage (at20°C) Operate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C)
Flux-resistant
1 coil latching
Without a test button
6 V DC
150 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
Max. 70% V of rated coil voltage (Initial)
Max. 70% V of rated coil voltage (Initial)
Set coil: 25 mA
Reset coil: 25 mA
Set coil: 240 Ω
Reset coil: 240 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Flux-resistant
1 coil latching
Without a test button
24 V DC
150 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
Max. 70% V of rated coil voltage (Initial)
Max. 70% V of rated coil voltage (Initial)
Set coil: 6.3 mA
Reset coil: 6.3 mA
Set coil: 3,840 Ω
Reset coil: 3,840 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Flux-resistant
Single side stable
Without a test button
48 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
5.2 mA
9,216 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Max. 75% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
Flux-resistant
Single side stable
Without a test button
24 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
10.4 mA
2,304 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Max. 75% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
Flux-resistant
Single side stable
With a test button
12 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
20.8 mA
576 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Max. 75% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
Flux-resistant
Single side stable
Without a test button
12 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
20.8 mA
576 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Max. 75% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
Sealed
2 coil latching
Without a test button
5 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
Max. 70% V of rated coil voltage (Initial)
Max. 70% V of rated coil voltage (Initial)
Set coil: 50 mA
Reset coil: 50 mA
Set coil: 100 Ω
Reset coil: 100 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Sealed
2 coil latching
Without a test button
48 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
Max. 70% V of rated coil voltage (Initial)
Max. 70% V of rated coil voltage (Initial)
Set coil: 5.2 mA
Reset coil: 5.2 mA
Set coil: 9,216 Ω
Reset coil: 9,216 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Flux-resistant
Single side stable
With a test button
48 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
5.2 mA
9,216 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Max. 75% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)
Flux-resistant
Single side stable
With a test button
6 V DC
250 mW
1 Form C
PC board terminal
[Between contact and coil]
Min. 8 mm (Clearance and Creepage)
100
500
41.7 mA
144 Ω
130% V of rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
250 V AC
16 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 3 mm)
10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 14 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 16 A 250 V AC
Max. 75% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
Max. 20 ms at rated coil voltage (without bounce)
Max. 20 ms at rated coil voltage (without bounce, without diode)

What's New

Stay up to date