LF-G Series Relays

Panasonic’s LF-G Series Relays are non-polarized 1 Form A power Relays that can switch up to 33 amps at 250 volts AC.  This Series is offered with a 1.5 or 1.8-millimeter contact gap and comply with photovoltaic standards, making them ideal for AC line switching in solar applications as well as UPS, microwave ovens, battery charge, and discharge systems. To save energy, designer engineers can reduce the coil holding voltage to 35% of the nominal coil voltage, dropping the operating power to 170 milliwatts.

These Relays have a compact size that allows for smaller, higher-density designs, and feature excellent creepage, clearance, and breakdown voltage to ensure safe operation.

Features and Benefits of The LF-G Series

  • High Capacity Control: 22A (standard) and 33A (high capacity), 250 VAC
  • Compact Size: L: 15.7 × W: 30.1 × H: 23.3 mm
  • Contact Gap: 1.5 mm or 1.8 mm
  • Internal Spacing: 9.5 mm creepage, 6.5 mm clearance
  • Compliant with IEC 62109 and VDE 0126, EN 61810-1 Certified
  • Energy Saving
  • 6kV Surge Withstand Voltage

Applications

  • Photovoltaic Power Generation Systems
  • Uninterruptible Power Supplies (UPS)
  • Home Appliances
  • Office Equipment

Part Number List

Results 16
Models table for series LF-G Series Relays
Part No.DatasheetContact TypeContact GapRated Coil VoltageContact ArrangementProtective ConstructionOperating Function Terminal TypeCoil Insulation ClassInsulation DistancePacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage (at 20°C 68°F)Contact ShapeContact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilCoil Holding VoltageOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive LoadDestructiveOver Load Contact Resistance (Initial)
Standard type
1.5 mm
9 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
155 mA
58 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency: 20 times/min]
Min. 30x103 ope. 22 A 250 V AC
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 22 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
High capacity type
1.5 mm
9 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
155 mA
58 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
31 A 250 V AC
7,750 VA
250 V AC
31 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 31 A, at 20°C)
40 to 80% V (contact carrying current: 31 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 31 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 47 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
High capacity type
1.8 mm
9 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
155 mA
58 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
33 A 250 V AC
8,250 VA
250 V AC
33 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 33 A, at 20°C)
40 to 80% V (contact carrying current: 33 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 500x103 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 33 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 50 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
High capacity type
1.8 mm
12 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
117 mA
103 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
33 A 250 V AC
8,250 VA
250 V AC
33 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 33 A, at 20°C)
40 to 80% V (contact carrying current: 33 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 500x103 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 33 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 50 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
High capacity type
1.5 mm
12 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
117 mA
103 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
31 A 250 V AC
7,750 VA
250 V AC
31 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 31 A, at 20°C)
40 to 80% V (contact carrying current: 31 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 31 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 47 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
Standard type
1.5 mm
24 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
59 mA
410 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency: 20 times/min]
Min. 30x103 ope. 22 A 250 V AC
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 22 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
High capacity type
1.5 mm
24 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
59 mA
410 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
31 A 250 V AC
7,750 VA
250 V AC
31 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 31 A, at 20°C)
40 to 80% V (contact carrying current: 31 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 31 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 47 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
Standard type
1.5 mm
18 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
78 mA
230 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency: 20 times/min]
Min. 30x103 ope. 22 A 250 V AC
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 22 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
High capacity type
1.8 mm
18 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
78 mA
230 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
33 A 250 V AC
8,250 VA
250 V AC
33 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 33 A, at 20°C)
40 to 80% V (contact carrying current: 33 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 500x103 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 33 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 50 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
High capacity type
1.5 mm
18 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
78 mA
230 Ω
1,400 mW
120% V of rated coil voltage
Single
AgSnO2 type
31 A 250 V AC
7,750 VA
250 V AC
31 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min (detection current: 10 mA)
4,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 31 A, at 20°C)
40 to 80% V (contact carrying current: 31 A, at 85°C)
Max. 20 ms at rated coil voltage (without bounce)
Max. 10 ms at rated coil voltage (without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60°C (When rated coil voltage applied)
Ambient temperature: -40 to +85°C
(When coil holding voltage is 45 to 80% V of rated coil voltage)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 23 g
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 30x103 ope. 31 A 250 V AC (cosΦ = 0.8)
[switching frequency ON : OFF = 0.1 s : 10 s]
Min. 50 ope. 47 A 250 V AC (cosΦ = 0.8)
Max. 100 mΩ (by voltage drop 6 V DC 1 A)

What's New

Stay up to date