Specification

Specifications table for model ST1-L2-DC24V-F
ItemPerformance characteristics
Operating Function 2 coil latching
Rated Coil Voltage24 V DC
Contact Arrangement1 Form A 1 Form B
Protective ConstructionSealed
Terminal TypePC board terminal
AccessoriesSockets are available.
Packing Quantity; Inner Carton (Pcs.) 50
Packing Quantity; Outer Carton (Pcs.)500
Rated Operating Current [±10%] (at 20°C)Set coil: 10 mA
Reset coil: 10 mA
Resistance [±10%] (at 20°C) Set coil: 2,400 Ω
Reset coil: 2,400 Ω
Rated Operating Power Approx. 240 mW
Max. Allowable Voltage (at 20°C 68°F)150% V of rated coil voltage
Contact ShapeSingle
Contact Resistance (Initial)Max. 30 mΩ (by voltage drop 6 V DC 1 A)
Contact MaterialAu-flashed AgSnO2 type
Contact Rating (Resistive Load)8 A 250 V AC, 5 A 30 V DC
Max. Switching Power (Resistive Load) 2,000 VA, 150 W
Max. Switching Voltage250 V AC, 30 V DC
Max. Switching Current8 A (AC), 5 A (DC)
Min. Switching Load (Reference Value) 100 mA 5 V DC
Insulation Resistance (Initial)Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric Strength (Initial): Between Open Contacts1,200 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact Sets2,000 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and Coil3,750 Vrms for 1 min (detection current: 10 mA)
Surge Withstand Voltage (Initial): Between Contact and Coil6,000 V
Hock Resistance (Functional)196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Hock Resistance (Destructive)980 m/s2 (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 µs)
Vibration Resistance (Destructive)10 to 55 Hz (at double amplitude of 3 mm)
Mechanical LifeMin. 10x106 ope. (switching frequency: at 180 times/min)
ConditionsAmbient temperature: -40 to +60°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Weight (Typ.)Approx. 10 g
Resistive Load[switching frequency ON : OFF = 1 s : 5 s]
Min. 100x103 ope. 8 A 250 V AC
Set Voltage Max. 80% V of rated coil voltage (Initial)
Reset VoltageMax. 80% V of rated coil voltage (Initial)
Time (Initial) (at 20°C 68°F) (Initial) Max. 15 ms at rated coil voltage (without bounce)
Reset Time (Initial) (at20°C 68°F) Max. 15 ms at rated coil voltage (without bounce, without diode)

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date