Part No: FX-CH-P
|Supply voltage||12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less|
|Current consumption||25 mA or less (When all indicators light up)|
|Bank selection input||High: 4 V to +V DC (Sink current: 0.5 to 3 mA Input impedance: 10 kOhm approx.) |
Low: 0 to 0.6 V DC, or open
|Power indicator||Green LED (Lights up when the power is ON)|
|Transmission operation indicator||Green LED (Lights up when loaded, blinks to lights up when saved)|
|Ambient temperature||-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit|
|Ambient humidity||35 to 85 % RH, Storage: 35 to 85 % RH|
|Voltage withstandability||1,000 V AC for one min. between all supply terminals connected together and enclosure|
|Insulation resistance||20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure|
|Vibration resistance||10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each|
|Shock resistance||98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each|
|Material||Enclosure: Heat-resistant ABS|
|Connection method||Connector |
(Note) The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
|Cable length||Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.|
|Weight||Net weight: 20 g approx. |
Gross weight: 25 g approx.
|Accessory||SL-CP1 (4-pin type snap male connector): 1 pc.|
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.