Fiber Sensors: Color Detection Fiber Sensor FZ-10
Model List
Found 6 matches. Display 1 - 6 matches.
Part No. | Data Sheet | CE marking directive compliance | Applicable fibers | Supply voltage | Current consumption | Sensing object | Output | Output:Utilization category | Output:Output operation | Output:Short-circuit protection | Response time | Parts Inventory |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Filter
Close
Filter by CE marking directive compliance |
Filter
Close
Filter by Applicable fibers |
Filter
Close
Filter by Supply voltage |
Filter
Close
Filter by Current consumption |
Filter
Close
Filter by Sensing object |
Filter
Close
Filter by Output |
Filter
Close
Filter by Output:Utilization category |
Filter
Close
Filter by Output:Output operation |
Filter
Close
Filter by Output:Short-circuit protection |
Filter
Close
Filter by Response time | |||
| Sensors › Factory Automation Sensors › Fiber Sensors › Color Detection Fiber Sensor FZ-10 › FD-L54 › Data sheet | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a |  | |
| Sensors › Factory Automation Sensors › Fiber Sensors › Color Detection Fiber Sensor FZ-10 › FZ-11 › Data sheet | EMC Directive, RoHS Directive | FD-L51, FD-L52, FD-L53, FD-L54 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 45 mA or less | Opaque or translucent object larger than the spot diameter of the applicable fiber (Note) Make sure to confirm detection with an actual sensor before use. | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Switchable either Coincident-ON or Incoincident-ON | Incorporated | 1 ms or less (3 ms or less when auto-teaching has been engaged) | | |
| Sensors › Factory Automation Sensors › Fiber Sensors › Color Detection Fiber Sensor FZ-10 › FD-L51 › Data sheet | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | | |
| Sensors › Factory Automation Sensors › Fiber Sensors › Color Detection Fiber Sensor FZ-10 › FD-L52 › Data sheet | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | | |
| Sensors › Factory Automation Sensors › Fiber Sensors › Color Detection Fiber Sensor FZ-10 › FD-L53 › Data sheet | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | n/a | | |
| Sensors › Factory Automation Sensors › Fiber Sensors › Color Detection Fiber Sensor FZ-10 › FZ-11P › Data sheet | EMC Directive, RoHS Directive | FD-L51, FD-L52, FD-L53, FD-L54 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 45 mA or less | Opaque or translucent object larger than the spot diameter of the applicable fiber (Note) Make sure to confirm detection with an actual sensor before use. | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) | DC-12 or DC-13 | Switchable either Coincident-ON or Incoincident-ON | Incorporated | 1 ms or less (3 ms or less when auto-teaching has been engaged) | |