Fiber Sensors: Communication Unit for CC-Link SC-GU2-C

Model List

Found 3 matches. Display 1 - 3 matches.
Part No.sort descendingData SheetApplicable sensor amplifierNumber of connectable unitsSupply voltageCurrent consumptionAllowable passing currentCommunication methodNumber of occupied stationBaud rate / Total extension lengthCommunication cableStation No. settingParts Inventory
   Column active Filter
Close

Filter by Applicable sensor amplifier

Column active Filter
Close

Filter by Number of connectable units

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Current consumption

Column active Filter
Close

Filter by Allowable passing current

Column active Filter
Close

Filter by Communication method

Column active Filter
Close

Filter by Number of occupied station

Column active Filter
Close

Filter by Baud rate / Total extension length

Column active Filter
Close

Filter by Communication cable

Column active Filter
Close

Filter by Station No. setting

 
design engineersPanasonicSC-GU2-C
Sensor amplifiers (NPN output type) that can connect to non-line connector CN-70 (optional) (FX-500/300/311/410 series, LS-401/403, DPS-401/402, GA-311)
(Note) Only the below models respond to data communication.
FX-501/502, FX-301/305, LS-403, DPS-401/402
Max. 16 units (Sensor amplifiers / input units) (Maximum of 12 units including the FX-500 Series can communicate optically)24 V DC +10-15 % Ripple P-P 10 % or less110 mA or less (excluding connected sensor amplifiers / input units)Wire-saving connector 2 A (Note 1), supply connector 6 A (Note 2)
(Note 1) Be sure to check that total current consumption of sensor amplifiers connected in cascade does not exceed allowable passing current.
(Note 2) In case of supplying power to other devices, be sure to set the current less than allowable passing current.
CC-Link Ver.1.10Switchable 1 or 4 station10 Mbps / 100 m 328.084 ft
5 Mbps / 150 m 492.126 ft
2.5 Mbps / 200 m 656.168 ft
625 kbps / 600 m 1968.504 ft
156 kbps / 1,200 m 3937.008 ft
Specified cable (twist pair cable with shield)
(Note) Use the CC-Link-specified cable.
1 to 64 (0 and 65 or more: Error)
design engineersPanasonicSC-GU2-EU
n/an/a12 to 24 V DC +10-15 % Ripple P-P 10 % or less (By power supplied from the SC-GU2-C)10 mA or lessn/an/an/an/an/an/a
design engineersPanasonicSC-T1JA
n/an/a12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less (By power supplied from the SC-GU2-C.)Max. 25 mA or less (when all indicators light up)
(Note) The current consumption and input current of output device connected are not included.
n/an/an/an/an/an/a

Related Documents

Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-100 Sensing Characteristics Data sheetFX-100 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-100 Sensing rangeFX-100 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-300 Sensing Characteristics Data sheetFX-300 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-300 Sensing rangeFX-300 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-311 Sensing rangeFX-311 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-410 Sensing rangeFX-410 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-500 Sensing Characteristics Data sheetFX-500 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › FX-500 Sensing rangeFX-500 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Communication Unit for CC-Link SC-GU2-C › SC-GU2-CSC-GU2-C