Fiber Sensors: Digital Fiber Sensor FX-100

Model List

Found 12 matches. Display 1 - 12 matches.
Part No.sort ascendingData SheetCE marking directive complianceSupply voltagePower consumptionOutputOutput:Output operationOutput:Short-circuit protectionExternal inputResponse timeSensitivity settingOperation indicatorParts Inventory
   Column active Filter
Close

Filter by CE marking directive compliance

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Power consumption

Column active Filter
Close

Filter by Output

Column active Filter
Close

Filter by Output:Output operation

Column active Filter
Close

Filter by Output:Short-circuit protection

Column active Filter
Close

Filter by External input

Column active Filter
Close

Filter by Response time

Column active Filter
Close

Filter by Sensitivity setting

Column active Filter
Close

Filter by Operation indicator

 
design engineersPanasonicFX-102P-Z
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA source current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedPNP non-contact input
- Signal condition
High: +4 V to +V DC (Sink current 0.5 to 3 mA)
Low: 0 to +0.6 V DC or Open
- Input impedance: 10 kOhm approx.
Emission frequency 1: 2.5 ms or less (factory default setting)
Emission frequency 2: 2.8 ms or less
Emission frequency 3: 3.2 ms or less
Emission frequency 4: 5.0 ms or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-102P-CC2
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA source current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedPNP non-contact input
- Signal condition
High: +4 V to +V DC (Sink current 0.5 to 3 mA)
Low: 0 to +0.6 V DC or Open
- Input impedance: 10 kOhm approx.
Emission frequency 1: 2.5 ms or less (factory default setting)
Emission frequency 2: 2.8 ms or less
Emission frequency 3: 3.2 ms or less
Emission frequency 4: 5.0 ms or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-102P
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA source current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedPNP non-contact input
- Signal condition
High: +4 V to +V DC (Sink current 0.5 to 3 mA)
Low: 0 to +0.6 V DC or Open
- Input impedance: 10 kOhm approx.
Emission frequency 1: 2.5 ms or less (factory default setting)
Emission frequency 2: 2.8 ms or less
Emission frequency 3: 3.2 ms or less
Emission frequency 4: 5.0 ms or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-102-Z
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedNPN non-contact input
- Signal condition
High: +8 V to +V DC or Open
Low: 0 to +2 V DC(Source current 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Emission frequency 1: 2.5 ms or less (factory default setting)
Emission frequency 2: 2.8 ms or less
Emission frequency 3: 3.2 ms or less
Emission frequency 4: 5.0 ms or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-102-CC2
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedNPN non-contact input
- Signal condition
High: +8 V to +V DC or Open
Low: 0 to +2 V DC(Source current 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Emission frequency 1: 2.5 ms or less (factory default setting)
Emission frequency 2: 2.8 ms or less
Emission frequency 3: 3.2 ms or less
Emission frequency 4: 5.0 ms or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-102
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedNPN non-contact input
- Signal condition
High: +8 V to +V DC or Open
Low: 0 to +2 V DC(Source current 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Emission frequency 1: 2.5 ms or less (factory default setting)
Emission frequency 2: 2.8 ms or less
Emission frequency 3: 3.2 ms or less
Emission frequency 4: 5.0 ms or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-101P-Z
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA source current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedPNP non-contact input
- Signal condition
High: +4 V to +V DC (Sink current 0.5 to 3 mA)
Low: 0 to +0.6 V DC or Open
- Input impedance: 10 kOhm approx.
Emission frequency 0: 250 micro s or less (factory default setting)
Emission frequency 1: 450 micro s or less
Emission frequency 2: 500 micro s or less
Emission frequency 3: 600 micro s or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-101P-CC2
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA source current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedPNP non-contact input
- Signal condition
High: +4 V to +V DC (Sink current 0.5 to 3 mA)
Low: 0 to +0.6 V DC or Open
- Input impedance: 10 kOhm approx.
Emission frequency 0: 250 micro s or less (factory default setting)
Emission frequency 1: 450 micro s or less
Emission frequency 2: 500 micro s or less
Emission frequency 3: 600 micro s or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-101P
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA source current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedPNP non-contact input
- Signal condition
High: +4 V to +V DC (Sink current 0.5 to 3 mA)
Low: 0 to +0.6 V DC or Open
- Input impedance: 10 kOhm approx.
Emission frequency 0: 250 micro s or less (factory default setting)
Emission frequency 1: 450 micro s or less
Emission frequency 2: 500 micro s or less
Emission frequency 3: 600 micro s or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-101-Z
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedNPN non-contact input
- Signal condition
High: +8 V to +V DC or Open
Low: 0 to +2 V DC(Source current 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Emission frequency 0: 250 micro s or less (factory default setting)
Emission frequency 1: 450 micro s or less
Emission frequency 2: 500 micro s or less
Emission frequency 3: 600 micro s or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-101-CC2
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedNPN non-contact input
- Signal condition
High: +8 V to +V DC or Open
Low: 0 to +2 V DC(Source current 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Emission frequency 0: 250 micro s or less (factory default setting)
Emission frequency 1: 450 micro s or less
Emission frequency 2: 500 micro s or less
Emission frequency 3: 600 micro s or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)
design engineersPanasonicFX-101
EMC Directive, RoHS Directive12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or lessNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Selectable either Light-ON or Dark-ON, at SET modeIncorporatedNPN non-contact input
- Signal condition
High: +8 V to +V DC or Open
Low: 0 to +2 V DC(Source current 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Emission frequency 0: 250 micro s or less (factory default setting)
Emission frequency 1: 450 micro s or less
Emission frequency 2: 500 micro s or less
Emission frequency 3: 600 micro s or less
2-point teaching / Limit teaching / Full-auto teachingOrange LED (lights up when the output is ON)

Related Documents

Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › Fiber Sensor Guide BookFiber Sensor Guide Book
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-100FX-100
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-100 Sensing Characteristics Data sheetFX-100 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-100 Sensing rangeFX-100 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-300 Sensing Characteristics Data sheetFX-300 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-300 Sensing rangeFX-300 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-311 Sensing rangeFX-311 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-410 Sensing rangeFX-410 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-500 Sensing Characteristics Data sheetFX-500 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-100 › FX-500 Sensing rangeFX-500 Sensing range