FX-551L3-P-C2

FX-551L3-P-C2 design engineers Panasonic

Part No: FX-551L3-P-C2

Specifications

ItemPerformance characteristics
Directive complianceRegulatory compliance
Supply voltage12 to 24 V DC +10-15% Ripple P-P 10 % or less
Power consumptionNormal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 720 mW or less (current consumption 30 mA or less at 24 V supply voltage)
Communication output (C/Q):IO-Link communicationIO-Link Specification V1.1
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Baud rateCOM3 (230.4 kbps)
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Process data4 byte
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Minimum cycle time1.0 ms
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Control output (DO)PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (Note) (at maximum source current)
(Note:)In case of using the cable (cable length 2 m 6.562 ft).
Control output (DO):Output operationSwitchable either Light-ON or Dark-ON by L/D mode
Control output (DO):Short-circuit protectionIncorporated
Response timeSTD: 250 μs or less, LONG: 2 ms or less, U-LG: 4 ms or less, HYPR: 24 ms or less, selectable
Sensitivity setting2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light sensitivity settingIncorporated, 4 steps
Incident light intensity display rangeSTD: 0 to 4,000, LONG: 0 to 8,000, U-LG / HYPR: 0 to 9,999
Timer functionIncorporated with variable OFF-delay / ON-delay / One-shot, switchable either effective or ineffective
Timer function:Timer period0.1 to 999.9 ms approx., in units of 0.1 ms approx.
Different frequency interference prevention functionIncorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1: 0.8 ms or less, F-2: 0.9 ms or less, F-3: 1.0 ms or less, F-4: 1.7 ms or less
(Note:)This function increases the hysteresis. Check the sensing condition when using the function.
ProtectionIP40 (IEC)
Ambient temperature-10 to +55℃ +14 to +131℉ (If 4 to 7 units are mounted in cascade: -10 to +50℃ +14 to +122℉ or if 8 to 16 units are mounted in cascade: -10 to +45℃ +14 to +113℉) (No dew condensation or icing allowed), Storage: -20 to +70℃ -4 to +158℉
Emitting element (modulated)Red LED (Peak emission wavelength: 660 nm 0.026 mil)
MaterialEnclosure, Case cover: Polycarbonate, Switch: Polyacetal
Cable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 20 m 65.617 ft is possible with 0.3 mm2, or more, cable.
(Condition of CE compliance: less tan 20 m 65.617 ft) (however, supply voltage 12 V DC or more)
WeightNet weight: 55 g approx., Gross weight: 80 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23℃ +73.4℉.

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › Data sheetData Sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-100 Sensing Characteristics Data sheetFX-100 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-100 Sensing rangeFX-100 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-300 Sensing Characteristics Data sheetFX-300 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-300 Sensing rangeFX-300 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-311 Sensing rangeFX-311 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-410 Sensing rangeFX-410 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-500 Sensing Characteristics Data sheetFX-500 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-500 Sensing rangeFX-500 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-550L / DP-100L / HG-C1000LFX-550L / DP-100L / HG-C1000L
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-551□-C2 / FX-551L3-P-C2FX-551□-C2 / FX-551L3-P-C2
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-551□-C2 / FX-551L3-P-C2FX-551□-C2 / FX-551L3-P-C2
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-551□-C2 / FX-551L3-P-C2FX-551□-C2 / FX-551L3-P-C2
Sensors › Factory Automation Sensors › Fiber Sensors › Digital Fiber Sensor FX-550L › FX-551L3-P-C2 › FX-551□-C2 / FX-551L3-P-C2FX-551□-C2 / FX-551L3-P-C2