Fiber Sensors: Sensor-PLC Connection System SC

Model List

Found 5 matches. Display 1 - 5 matches.
Part No.sort descendingData SheetApplicable unitSupply voltageSupply current for unitsSignal channel No.Ambient temperatureAmbient humidityMaterialWeightCE marking directive complianceAllowable passing currentParts Inventory
   Column active Filter
Close

Filter by Applicable unit

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Supply current for units

Column active Filter
Close

Filter by Signal channel No.

Column active Filter
Close

Filter by Ambient temperature

Column active Filter
Close

Filter by Ambient humidity

Column active Filter
Close

Filter by Material

Column active Filter
Close

Filter by Weight

Column active Filter
Close

Filter by CE marking directive compliance

Column active Filter
Close

Filter by Allowable passing current

 
design engineersPanasonicCN-70
Refer to the list of "Applicable unit of non-line connector"Depends on the supply voltage from SC-MIL100 mA or less1 channel–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed)
Storage: –20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHEnclosure: ABSNet weight: 4 g approx.n/an/a
design engineersPanasonicSC-MIL-S
n/aDepends on the supply voltage from SC-MILn/aConnectable up to 16 channels (The signal from up to 16th point (counting from unit adjacent to SC-MIL) of all units connected to SC-MIL is transferred. However, the signal thereafter is not transferred. Note that SC-MIL-S does not occupy any signal point.)–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHEnclosure: Heat-resistant ABSNet weight: 20 g approx.n/a1 A or less (Same as maximum permissible current consumption of all units connected to SC-MIL-S.)
(Note: When either the permissible current amount of power supply unit or the permissible current amount of cable to be connected is less than allowable through current value, adjust the current to the smallest value. .)
design engineersPanasonicSC-T1J
n/a12 to 24 V DC ±10 %100 mA or less
(Note:Set the maximum current passing through input / output line to 50 mA or less.)
1 input–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHEnclosure: Heat-resistant ABS10 g approx.EMC Directive, RoHS Directiven/a
design engineersPanasonicSC-T1J-P
n/a12 to 24 V DC ±10 %100 mA or less
(Note:Set the maximum current passing through input / output line to 50 mA or less.)
1 input–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHEnclosure: Heat-resistant ABS10 g approx.EMC Directive, RoHS Directiven/a
design engineersPanasonicSC-MIL
n/a12 to 24 V DC plus or minus 10 % (In combination with SC-TP8J, the unit can be also used with a power supply of 5 to 24 V DC plus or minus 10 %.)
(Note:The plug-in sensor main unit SC-MIL incorporates a cable lead-out connector in addition to the MIL connector, which allows to receive the supply voltage from the separate power supply.)
n/aConnectable up to 16 channels (The signal from up to 16th point (counting from unit adjacent to SC-MIL-S) of all units connected to SC-MIL-S is transferred. However, the signal thereafter is not transferred. Note that SC-MIL-S does not occupy any signal point.)–10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RHEnclosure: Heat-resistant ABSNet weight: 25 g approx.EMC Directive, RoHS Directive2 A or less (Same as maximum permissible current consumption of all units connected toSC-MIL-S.)
(Note:When either the permissible current amount of power supply unit or the permissible current amount of cable to be connected is less than allowable through current value, adjust the current to the smallest value. .)

Related Documents

Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-100 Sensing Characteristics Data sheetFX-100 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-100 Sensing rangeFX-100 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-300 Sensing Characteristics Data sheetFX-300 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-300 Sensing rangeFX-300 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-311 Sensing rangeFX-311 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-410 Sensing rangeFX-410 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-500 Sensing Characteristics Data sheetFX-500 Sensing Characteristics Data sheet
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › FX-500 Sensing rangeFX-500 Sensing range
Sensors › Factory Automation Sensors › Fiber Sensors › Sensor-PLC Connection System SC › SC seriesSC series