HG-S1032

HG-S1032 design engineers Panasonic

Part No: HG-S1032

Specifications

ItemPerformance characteristics
CE marking directive complianceEMC Directive, RoHS Directive
Applicable controllerHG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113
Position detection methodOptical absolute linear encoder method
Measuring range32mm 1.260 in
Stroke32.5 mm 1.280 in or more
Measuring force : Downward mount2.97 N or less
1.90 N
(Note 1): When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit.
(Note 2): Typical value near center of measurement.
Measuring force : Upward mount2.09 N or less
1.19 N
(Note 1): Measured at an ambient temperature of +20 ℃ +68 ℉.
(Note 2): Typical value near center of measurement.
Measuring force : Side mount2.53 N or less
1.50 N
(Note 1): Measured at an ambient temperature of +20 ℃ +68 ℉.
(Note 2): Typical value near center of measurement.
Resolution0.5 μm 0.020 mil
Sampling rate1ms
Indication accuracy(P-P)Full range: 3.0 μm 0.118 mil or less
Narrow range: 2.0 μm 0.079 mil or less
(any 60 μm 2.362 mil)
(Note): Measured at an ambient temperature of +20 ℃ +68 ℉.
Tip deviation amount40 μm 1.575 mil (typical)(Note):Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values.
Hot swap functionIncorporated
Operation indicator2-color LED (Orange / Green)
Environmental resistance : ProtectionIP67 (IEC)
(Note): Excludes damage and deterioration to rubber bellows due to external causes.
Environmental resistance : Ambient temperature-10 to +55 ℃ +14 to +131 ℉
(No condensation or icing),
Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Insulation resistance100 MΩ or more at 250 V DC
Environmental resistance : Vibration resistance10 to 150 Hz frequency, 3 mm 0.118 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance1,960 m/s2acceleration in X, Y and Z directions three times each
Mounting nut tightening strength12.5N・m
Probe tightening torque0.1 to 0.4 N・m (no force applied to main unit)
Grounding methodCapacitor grounding
MaterialBody: Aluminum, Holder: Stainless steel, Spindle: Free-cutting steel, Probe: Ceramic, Rubber bellows: NBR (black)
※The probes (optional) are also available.
WeightNet weight: 150 g approx.
AccessorySensor head fastening wrench 1 pc., Mounting nut 1 pc.
Remark(Note):Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 ℉.

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › Data sheetData Sheet
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › HG-SHG-S
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › HG-S Air-Driven TypeHG-S Air-Driven Type
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › HG-S1010(R) / HG-S1110(R) / HG-S1032HG-S1010(R) / HG-S1110(R) / HG-S1032
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › HG-S1032 [32mm type / Standard type]HG-S1032 [32mm type / Standard type]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › HG-S1032 [32mm type / Standard type]HG-S1032 [32mm type / Standard type]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › HG-S1032 [32mm type / Standard type]HG-S1032 [32mm type / Standard type]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1032 › HG-S1032 [32mm type / Standard type]HG-S1032 [32mm type / Standard type]