HG-S1110

HG-S1110 design engineers Panasonic

Part No: HG-S1110

Specifications

ItemPerformance characteristics
CE marking directive complianceEMC Directive, RoHS Directive
Applicable controllerHG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113
Position detection methodOptical absolute linear encoder method
Measuring range10 mm 0.394 in
Stroke10.5 mm 0.413 in or more
Measuring force : Downward mount1.65 N or less
1.10 N
(Note 1): When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit.
(Note 2): Typical value near center of measurement.
Measuring force : Upward mount1.35 N or less
0.85 N
(Note 1): Measured at an ambient temperature of +20 ℃ +68 ℉.
(Note 2): Typical value near center of measurement.
Measuring force : Side mount1.50 N or less
0.95 N
(Note 1): Measured at an ambient temperature of +20 ℃ +68 ℉.
(Note 2): Typical value near center of measurement.
Resolution0.1 μm 0.004 mil
Sampling rate1ms
Indication accuracy(P-P)Full range: 1.0 μm 0.039 mil or less
Narrow range: 0.5 μm 0.020 mil or less
(any 60 μm 2.362 mil)
(Note): Measured at an ambient temperature of +20 ℃ +68 ℉.
Tip deviation amount35 μm 1.378 mil (typical)(Note):Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values.
Hot swap functionIncorporated
Operation indicator2-color LED (Orange / Green)
Environmental resistance : ProtectionIP67 (IEC)
(Note): Excludes damage and deterioration to rubber bellows due to external causes.
Environmental resistance : Ambient temperature-10 to +55 ℃ +14 to +131 ℉
(No condensation or icing),
Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Insulation resistance100 MΩ or more at 250 V DC
Environmental resistance : Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance1,960 m/s2acceleration in X, Y and Z directions three times each
Mounting nut tightening strength12.5N・m
Probe tightening torque0.1 to 0.4 N・m (no force applied to main unit)
Grounding methodCapacitor grounding
MaterialBody: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe: Ceramic, Rubber bellows: NBR (black)
※The probes (optional) are also available.
WeightNet weight: 80 g approx.
AccessoryStandard type (HG-S1010 / HG-S1110): Sensor head fastening wrench 1 pc., Mounting nut 1 pc.
Remark(Note):Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 ℉.

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1110 › Data sheetData Sheet
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1110 › HG-SHG-S
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1110 › HG-S1010(R) / HG-S1110(R) / HG-S1032HG-S1010(R) / HG-S1110(R) / HG-S1032
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1110 › HG-S1010, HG-S1110 [10mm type / Standard type]HG-S1010, HG-S1110 [10mm type / Standard type]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1110 › HG-S1010, HG-S1110 [10mm type / Standard type]HG-S1010, HG-S1110 [10mm type / Standard type]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1110 › HG-S1010, HG-S1110 [10mm type / Standard type]HG-S1010, HG-S1110 [10mm type / Standard type]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-S1110 › HG-S1010, HG-S1110 [10mm type / Standard type]HG-S1010, HG-S1110 [10mm type / Standard type]