HG-SC101-P

HG-SC101-P design engineers Panasonic

Part No: HG-SC101-P

Specifications

ItemPerformance characteristics
CE marking directive complianceEMC Directive, RoHS Directive
Applicable controllern/a
Position detection methodn/a
Measuring rangen/a
Stroken/a
Measuring force : Downward mountn/a
Measuring force : Upward mountn/a
Measuring force : Side mountn/a
Resolutionn/a
Sampling raten/a
Indication accuracy(P-P)n/a
Tip deviation amountn/a
Hot swap functionn/a
Operation indicatorn/a
Environmental resistance : ProtectionIP40 (IEC)
Environmental resistance : Ambient temperature-10 to +50 ℃ +14 to +122 ℉ (No condensation or icing), Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Mounting nut tightening strengthn/a
Probe tightening torquen/a
Grounding methodn/a
MaterialCase: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal
WeightNet weight:
140 g approx.
Accessoryn/a
RemarkWhere measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 ℉.
[[Controller]] Compatible sensor headHG-S1010(R)、HG-S1110(R)、HG-S1032
[[Controller]] Number of connectable unitsUp to 15 slave units can be connected per master unit. (Note):When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit.
[[Controllers]] Supply voltage24 V DC ±10 %, including ripple 0.5 V (P-P)
[[Controllers]] Current consumption70 mA or less (when sensor head is connected)(Note):Current consumption does not include analog current output.
[[Controller]] Analog current output• Current output range:4 to 20 mA/F.S.(default value)
• Error output:0 mA
• Linearity:±0.25% F.S.
• Load impedance:250Ω max.
[[Controller]] Control outputs(Output 1, Output 2, Output 3)
NPN open-collector transistor
• Maximum sink current: 50 mA(Note 5))
• Applied voltage: 30 V DC or less(between output and 0 V)
• Residual voltage: 1.5 V or less(at 50 mA sink current)
• Leakage current: 0.1 mA or less

>
PNP open-collector transistor
• Maximum source current: 50 mA(Note 5)
• Applied voltage: 30 V DC or less(between output and +V)
• Residual voltage: 1.5 V or less(at 50 mA source current)
• Leakage current: 0.1 mA or less
[[Controller]] Control outputs(Output 1, Output 2, Output 3):Short-circuit protectionIncorporated (automatic reset type)
[[Controller]] Control outputs(Output 1, Output 2, Output 3):Judgment outputNO / NC switching method
[[Controller]] Control outputs(Output 1, Output 2, Output 3):Alarm outputOpen when alarm occurs
[[Controller]] External inputs (Input 1, Input 2, Input 3)
Non-contact input or NPN open-collector transistor
• Input condition:
Invalid (+8 V to +V DC or open)
Valid (0 to +1.2 V DC)
•Input impedance: 10 kΩ approx.


Non-contact input or PNP open-collector transistor
• Input condition:
Invalid (0 to +0.6 V DC or open)
Valid (+4 V to +V DC)
• Input impedance: 10 kΩ approx.
External inputs (Input 1, Input 2, Input 3):Trigger inputInput time 2 ms or more (ON)
[[Controller]] External inputs (Input 1, Input 2, Input 3):Preset inputInput time 20 ms or more (ON)
[[Controller]] External inputs (Input 1, Input 2, Input 3):Reset inputInput time 20 ms or more (ON)
[[Controller]] External inputs (Input 1, Input 2, Input 3) Bank input A / BInput time 20 ms or more (ON)(Note):Banks 1 to 3 can be selected by switching bank input A / B.
[[Controller]] Response time3 ms, 5 ms, 10 ms, 100 ms, 500 ms, 1,000 ms switching type
[[Controller]] Digital display204-segment LCD
[[Controller]] Display resolution0.1μm 0.004 mil
[[Controller]] Display range-199.9999 to 199.9999mm -7.874 to 7.874 in
[[Controller]] Contamination level2
[[Controller]] Elevation2,000 m 6561.68 ft or less (Note):Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
[[Controller]] Environmental resistance:Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
[[Controller]] Cable0.2 mm2 2-core cable (brown and blue lead wires) / 0.15 mm2 7‑core composite cable, 2 m 6.562 ft long
[[Controller]] NotesWhere measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20℃ +68℉.

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › Data sheetData Sheet
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › HG-SHG-S
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › HG-S Air-Driven TypeHG-S Air-Driven Type
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › HG-S1010(R) / HG-S1110(R) / HG-S1032HG-S1010(R) / HG-S1110(R) / HG-S1032
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › HG-SC101(-P), HG-TC101(-P) [Controller Master unit]HG-SC101(-P), HG-TC101(-P) [Controller Master unit]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › HG-SC101(-P), HG-TC101(-P) [Controller Master unit]HG-SC101(-P), HG-TC101(-P) [Controller Master unit]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › HG-SC101(-P), HG-TC101(-P) [Controller Master unit]HG-SC101(-P), HG-TC101(-P) [Controller Master unit]
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Contact-Type Digital Displacement Sensor HG-S › HG-SC101-P › HG-SC101(-P), HG-TC101(-P) [Controller Master unit]HG-SC101(-P), HG-TC101(-P) [Controller Master unit]