Laser Measurement Sensors: High Speed・High Accuracy Eddy Current Type Digital Displacement Sensor GP-X

Model List

Found 18 matches. Display 1 - 15 matches.
Part No.sort descendingData SheetCE marking directive compliance[[Sensor heads]] Type[[Sensor heads]] Sensing range[[Sensor heads]] Standard sensing object[[Sensor heads]] Temperature characteristics[[Sensor heads]] Pollution degree[[Sensor heads]] Protection[[Sensor heads]] Ambient temperature[[Sensor heads]] Ambient humidity[[Sensor heads]] Voltage withstandabilityParts Inventory
   Column active Filter
Close

Filter by CE marking directive compliance

Column active Filter
Close

Filter by [[Sensor heads]] Type

Column active Filter
Close

Filter by [[Sensor heads]] Sensing range

Column active Filter
Close

Filter by [[Sensor heads]] Standard sensing object

Column active Filter
Close

Filter by [[Sensor heads]] Temperature characteristics

Column active Filter
Close

Filter by [[Sensor heads]] Pollution degree

Column active Filter
Close

Filter by [[Sensor heads]] Protection

Column active Filter
Close

Filter by [[Sensor heads]] Ambient temperature

Column active Filter
Close

Filter by [[Sensor heads]] Ambient humidity

Column active Filter
Close

Filter by [[Sensor heads]] Voltage withstandability

 
design engineersPanasonicGP-XC5SE-P
EMC Directive, RoHS DirectiveNon-threaded type For 1 mm 0.039 in sensing0 to 1 mm 0 to 0.039 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC8S
EMC Directive, RoHS DirectiveNon-threaded type For 2 mm 0.079 in sensing0 to 2 mm 0 to 0.079 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC8S-P
EMC Directive, RoHS DirectiveNon-threaded type For 2 mm 0.079 in sensing0 to 2 mm 0 to 0.079 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-X22KL
EMC Directive, RoHS DirectiveThreaded type For 10 mm 0.394 in sensing0 to 10 mm 0 to 0.394 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-X5SE
EMC Directive, RoHS DirectiveNon-threaded type For 1 mm 0.039 in sensing0 to 1 mm 0 to 0.039 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-X8S
EMC Directive, RoHS DirectiveNon-threaded type For 2 mm 0.079 in sensing0 to 2 mm 0 to 0.079 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC3SE
EMC Directive, RoHS DirectiveNon-threaded type For 0.8 mm 0.031 in sensing0 to 0.8 mm 0 to 0.031 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC3SE-P
EMC Directive, RoHS DirectiveNon-threaded type For 0.8 mm 0.031 in sensing0 to 0.8 mm 0 to 0.031 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-X10M
EMC Directive, RoHS DirectiveThreaded type For 2 mm 0.079 in sensing0 to 2 mm 0 to 0.079 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-X12ML
EMC Directive, RoHS DirectiveThreaded type For 5 mm 0.197 in sensing0 to 5 mm 0 to 0.197 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-X3SE
EMC Directive, RoHS DirectiveNon-threaded type For 0.8 mm 0.031 in sensing0 to 0.8 mm 0 to 0.031 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC12ML-P
EMC Directive, RoHS DirectiveThreaded type For 5 mm 0.197 in sensing0 to 5 mm 0 to 0.197 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC22KL-P
EMC Directive, RoHS DirectiveThreaded type For 10 mm 0.394 in sensing0 to 10 mm 0 to 0.394 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC10M
EMC Directive, RoHS DirectiveThreaded type For 2 mm 0.079 in sensing0 to 2 mm 0 to 0.079 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure
design engineersPanasonicGP-XC10M-P
EMC Directive, RoHS DirectiveThreaded type For 2 mm 0.079 in sensing0 to 2 mm 0 to 0.079 in
(Note) The sensing range is specified for the standard sensing object.
Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
3 (Industrial environment)IP67 (IEC), IP67g (Note:If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉35 to 85 % RH, Storage: 35 to 85 % RH250 V AC for one min. between all supply terminals connected together and enclosure

Pages