GD-3

GD-3 design engineers Panasonic

Part No: GD-3

Specifications

ItemPerformance characteristics
TypeSmall object detection
Applicable controllerGD-C3
Sensing range (between sensor heads)10 mm 0.394 in or less
Detectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 5 mm 0.197 inStandard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): -
Aluminum: -
Copper: -
Brass: -
Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Detectable sheet thickness : Applicable controllers GD-C3 : Setting distance 5 mm 0.197 inStandard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): 0.01 to 0.1 mm 0.0004 to 0.004 in
Aluminum: 0.015 to 1 mm 0.001 to 0.039 in
Copper: 0.018 to 1 mm 0.001 to 0.039 in
Brass: 0.03 to 1 mm 0.001 to 0.039 in
Stainless steel (SUS304): 0.3 to 1 mm 0.012 to 0.039 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Detectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 10 mm 0.394 inStandard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): -
Aluminum: -
Copper: -
Brass: -
Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Detectable sheet thickness : Applicable controllers GD-C3 : Setting distance 10 mm 0.394 inStandard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): 0.03 to 0.1 mm 0.001 to 0.004 in
Aluminum: 0.015 to 1 mm 0.001 to 0.039 in
Copper: 0.018 to 0.3 mm 0.001 to 0.012 in
Brass: 0.03 to 0.5 mm 0.001 to 0.020 in
Stainless steel (SUS304): 0.3 to 1 mm 0.012 to 0.039 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Environmental resistance : ProtectionIP67 (IEC)
Environmental resistance : Ambient temperature-10 to +60 degrees +14 to +140 degrees Fahrenheit , Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
Environmental resistance : Ambient humidity45 to 85 % RH, Storage: 35 to 95 % RH
Environmental resistance : Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions three times each
MaterialEnclosure: Stainless steel (SUS303)
Sensing face: ABS
CableSender: 0.3 2 single core shielded cable, 3 m 9.843 ft long
Receiver: 0.1 2 2-core shielded cable, 3 m 9.843 ft long
Cable extensionExtension up to total 20 m 65.617 ft is possible with an equivalent shielded cable.
WeightNet weight: 90 g approx.
Accessory-

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Sensors › Factory Automation Sensors › Laser Measurement Sensors › Metal-sheet Double-feed Detector GD › GD-3 › Data sheetData Sheet
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Metal-sheet Double-feed Detector GD › GD-3 › GDGD
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Metal-sheet Double-feed Detector GD › GD-3 › GD-3GD-3
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Metal-sheet Double-feed Detector GD › GD-3 › GD-3GD-3
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Metal-sheet Double-feed Detector GD › GD-3 › GD-3GD-3
Sensors › Factory Automation Sensors › Laser Measurement Sensors › Metal-sheet Double-feed Detector GD › GD-3 › GD-3GD-3