|CE Marking Directives||EMC Directive, RoHS Directive|
|Sensing Range||6 mm 0.236 in (fixed)|
|Minimum Sensing Object||0.8 × 1.2 mm 0.031 × 0.047 in opaque object|
|Hysteresis||0.05 mm 0.002 in or less|
|Repeatability||0.01 mm 0.0004 in or less|
|Supply Voltage||5 to 24 V DC ±10 % Ripple P-P 10 % or less|
|Current Consumption||15 mA or less|
|Output||PNP open-collector transistor|
・Maximum source current: 50 mA
・Applied voltage: 30 V DC or less (between output and + V)
・Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
|Output: Output Operation||Incorporated with 2 outputs: Light-ON / Dark-ON|
|Output: Short-Circuit Protection||Incorporated|
|Response Time||Under light received condition: 20 μs or less|
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz)(Note)
(Note) The response frequency is the value when the disc, given in the figure below, is rotated.
|Operation Indicator||Orange LED (lights up under light received condition)|
|Ambient Temperature||-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉|
|Ambient Humidity||5 to 85 % RH, Storage: 5 to 95 % RH|
|Ambient Illuminance||Fluorescent light: 1,000 ℓx at the light-receiving face|
|Voltage Withstandability||1,000 V AC for one min. between all supply terminals connected together and enclosure|
|Insulation Resistance||20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure|
|Vibration Resistance||10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each|
|Shock Resistance||15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each|
|Emitting Element||Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)|
Display section: Polycarbonate
|Cable Length||Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.|
(Note) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
|Weight (Typ.)||Net weight: 3 g approx.|
Gross weight: 3 g approx.
|Remark||Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.|
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.