Specification

Specifications table for model PM2-LH10
ItemPerformance characteristics
CE Marking DirectivesEMC Directive, RoHS Directive
Sensing range2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
Minimum sensing objectø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
Hysteresis20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
Repeatability(perpendicular to sensing axis)0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
Supply voltage5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Current consumptionAverage: 25 mA or less, Peak: 80 mA or less
OutputNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output:Overcurrent protectionIncorporated
Output:Utilization categoryDC-12 or DC-13
Response time0.8 ms or less
Operation indicatorRed LED (lights up when the output is ON)
Pollution degree3 (Industrial environment)
Ambient Temperature–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
Ambient Humidity45 to 85 % RH, Storage: 45 to 85 % RH
Ambient IlluminanceIncandescent light: 3,500 lx or less at the light-receiving face
Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting ElementInfrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
MaterialEnclosure: Polycarbonate, Terminal part: HSM (Ag plated)
Cable-
Cable LengthTotal length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
Weight (Typ.)Net weight: 4.5 g approx.
Gross weight: 85 g approx.(10 piece package)

Stock Check

Stock check for product PM2-LH10
DistributorQuantityInventory Date
Digi-Key Electronics
United States
Tel. 1-800-344-4539
30407/17/2019
Ramco Innovations - National
United States
Tel. 1-800-280-6933
11807/17/2019
Allied Electronics&Automation
United States
Tel. 1-817-595-3500
7607/17/2019

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.