|CE Marking Directives||EMC Directive, RoHS Directive|
|Sensing range||2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) |
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
|Minimum sensing object||ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)|
|Hysteresis||20 % or less of operation distance with white non-glossy paper|
(15 × 15 mm 0.591 × 0.591 in)
|Repeatability(perpendicular to sensing axis)||0.08 mm 0.003 in or less|
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
|Supply voltage||5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less|
|Current consumption||Average: 25 mA or less, Peak: 80 mA or less|
|Output||NPN open-collector transistor|
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
|Output:Utilization category||DC-12 or DC-13|
|Response time||0.8 ms or less|
|Operation indicator||Red LED (lights up when the output is ON)|
|Pollution degree||3 (Industrial environment)|
|Ambient Temperature||–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), |
Storage: –25 to +80 ℃ –13 to +176 ℉
|Ambient Humidity||45 to 85 % RH, Storage: 45 to 85 % RH|
|Ambient Illuminance||Incandescent light: 3,500 lx or less at the light-receiving face|
|Vibration resistance||10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each|
|Shock resistance||500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each|
|Emitting Element||Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)|
|Material||Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)|
|Cable Length||Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.|
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
|Weight (Typ.)||Net weight: 4 g approx.|
Gross weight: 80 g approx.(10 piece package)
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.