Micro Photoelectric Sensors: Convergent Reflective Micro Photoelectric Sensor PM2

Model List

Reset parameters

Found 12 matches. Display 1 - 12 matches.

Part No.	Data Sheet	CE marking directives	Sensing range	Minimum sensing object	Hysteresis	Repeatability(perpendicular to sensing axis)	Supply voltage	Current consumption	Output	Output:Overcurrent protection	Output:Utilization category	Parts Inventory
		Filter Close Filter by CE marking directives	Filter Close Filter by Sensing range	Filter Close Filter by Minimum sensing object	Filter Close Filter by Hysteresis	Filter Close Filter by Repeatability(perpendicular to sensing axis)	Filter Close Filter by Supply voltage	Filter Close Filter by Current consumption	Filter Close Filter by Output	Filter Close Filter by Output:Overcurrent protection	Filter Close Filter by Output:Utilization category
design engineersPanasonicPM2-LH10PM2-LH10	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LH10 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LF10B-C1PM2-LF10B-C1	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LF10B-C1 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LH10BPM2-LH10B	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LH10B › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LL10-C1PM2-LL10-C1	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LL10-C1 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LF10PM2-LF10	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LF10 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LF10BPM2-LF10B	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LF10B › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LH10B-C1PM2-LH10B-C1	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LH10B-C1 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LL10PM2-LL10	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LL10 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LL10BPM2-LL10B	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LL10B › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LL10B-C1PM2-LL10B-C1	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LL10B-C1 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LF10-C1PM2-LF10-C1	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LF10-C1 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13
design engineersPanasonicPM2-LH10-C1PM2-LH10-C1	Sensors › Factory Automation Sensors › Micro Photoelectric Sensors › Convergent Reflective Micro Photoelectric Sensor PM2 › PM2-LH10-C1 › Data sheet	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13

Related Documents