Micro Photoelectric Sensors: Convergent Reflective Micro Photoelectric Sensor PM2

Model List

Found 12 matches. Display 1 - 12 matches.
Part No.sort descendingData SheetCE marking directivesSensing rangeMinimum sensing objectHysteresisRepeatability(perpendicular to sensing axis)Supply voltageCurrent consumptionOutputOutput:Overcurrent protectionOutput:Utilization categoryParts Inventory
   Column active Filter
Close

Filter by CE marking directives

Column active Filter
Close

Filter by Sensing range

Column active Filter
Close

Filter by Minimum sensing object

Column active Filter
Close

Filter by Hysteresis

Column active Filter
Close

Filter by Repeatability(perpendicular to sensing axis)

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Current consumption

Column active Filter
Close

Filter by Output

Column active Filter
Close

Filter by Output:Overcurrent protection

Column active Filter
Close

Filter by Output:Utilization category

 
design engineersPanasonicPM2-LH10
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LF10B-C1
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LH10B
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LL10-C1
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LF10
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LF10B
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LH10B-C1
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LL10
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LL10B
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LL10B-C1
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LF10-C1
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13
design engineersPanasonicPM2-LH10-C1
EMC Directive, RoHS Directive2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or lessAverage: 25 mA or less, Peak: 80 mA or lessNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
IncorporatedDC-12 or DC-13