EX-11SEA-PN

EX-11SEA-PN design engineers Panasonic

Part No: EX-11SEA-PN

Specifications

ItemPerformance characteristics
Sensing range150 mm 5.906 in
Min. sensing objectdia. 1.0 mm dia. 0.039 in opaque object
Hysteresis-
Repeatability(perpendicular to sensing axis)0.05 mm 0.002 in or less
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumptionEmitter: 10 mA or less
Receiver: 10 mA or less
OutputPNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
Output:Utilization categoryDC-12 or DC-13
Output:Short-circuit protectionIncorporated
Response time0.5 ms or less
Operation indicatorOrange LED (lights up when the output is ON)
Incident beam indicator-
Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
Pollution degree3 (Industrial environment)
ProtectionIP67 (IEC)
Ambient temperature-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx at the light-receiving face
EMCEN 60947-5-2
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting elementRed LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
MaterialEnclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
WeightNet weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
AccessoryMounting screws: 1 set

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Sensors › Factory Automation Sensors › Photoelectric Sensors / Laser Sensors › Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S › EX-11SEA-PN › Data sheetData Sheet
Sensors › Factory Automation Sensors › Photoelectric Sensors / Laser Sensors › Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S › EX-11SEA-PN › EX SERIESEX SERIES
Sensors › Factory Automation Sensors › Photoelectric Sensors / Laser Sensors › Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S › EX-11SEA-PN › EX-10 Ver.2EX-10 Ver.2
Sensors › Factory Automation Sensors › Photoelectric Sensors / Laser Sensors › Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S › EX-11SEA-PN › EX-11(S)E□ / 13(S)E□ / 19E□EX-11(S)E□ / 13(S)E□ / 19E□
Sensors › Factory Automation Sensors › Photoelectric Sensors / Laser Sensors › Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S › EX-11SEA-PN › EX-11(S)E□ / 13(S)E□ / 19E□EX-11(S)E□ / 13(S)E□ / 19E□
Sensors › Factory Automation Sensors › Photoelectric Sensors / Laser Sensors › Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S › EX-11SEA-PN › EX-11(S)E□ / 13(S)E□ / 19E□EX-11(S)E□ / 13(S)E□ / 19E□
Sensors › Factory Automation Sensors › Photoelectric Sensors / Laser Sensors › Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S › EX-11SEA-PN › EX-11(S)E□ / 13(S)E□ / 19E□EX-11(S)E□ / 13(S)E□ / 19E□