Part No: HG-C1400-P
|Applicable standard||EMC Directive Compliance, FDA Standard|
|Measurement center distance||400 mm 15.748 in|
|Measuring range||±200 mm 7.874 in|
|Repeatability||300 μm 11.811 mil (Measuring distance 200 to 400 mm 7.874 to 15.748 in) |
800 μm 31.496 mil (Measuring distance 400 to 600 mm 15.748 to 23.622 in)
|Linearity||±0.2 % F.S. (Measuring distance 200 to 400 mm 7.874 to 15.748 in) |
±0.3 % F.S. (Measuring distance 400 to 600 mm 15.748 to 23.622 in)
|Temprerature characteristics||0.03% F.S./℃|
|Light source||Red semiconductor laser Class 2 [JIS/IEC/GB/FDA (Note) ] |
Max. output: 1 mW
emission peak wavelength: 655 nm 0.026 mil
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).
|Beam diameter||ø500 μm 19.6851 mil approx. |
(Note) This is the size in the measurement center distance. These values were defined by using 1/e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value.
|Supply voltage||12 to 24 V DC ±10 %, Ripple P-P 10 % or less|
|Current consumption||40 mA or less (at 24V DC supply voltage) |
65 mA or less (at 12V DC supply voltage)
Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ： 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage)
|Control output||PNP open-collector transistor |
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (Between control output to +V)
- Residual voltage: 1.5 V or less (At 50 mA source current)
- Leakage current: 0.1 mA or less
|Control output:Output operation||Either Light-ON or Dark-ON|
|Control output:Short-circuit protection||Incorporated (Auto reset type)|
|Analogue output : Analog voltage output||• Output range: 0 to 5 V (at alarm: +5.2 V) |
• Output impedance: 100Ω
|Analogue output : Analog current output||• Output range: 4 to 20mA (at alarm: 0mA) |
• Output impedance: 300Ω or less
Note : Analog current output has been added from shipment in August 2016.
|Response time||Switchable between 1.5 ms / 5 ms / 10 ms|
|External input||PNP non-contact input |
- Input conditions
Invalid: 0 to +0.6 V DC or Open
Valid: +4 to +V DC
- Input impedance: 10 kΩ approx.
|Operating altitude||2,000 m 6561.680 ft or less|
|Ambient temperature||-10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉|
|Ambient humidity||35 to 85 % RH, Storage: 35 to 85 % RH|
|Ambient illuminance||Incandescent light: 3,000 ℓx or less at the light-receiving face|
|Vibration resistance||10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each|
|Shock resistance||500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each|
|Cable||5-core composite cable, 2 m 6.5617 ft long|
|Cable extension||Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable.|
|Material||Enclosure: Aluminum die-cast |
Front cover: Acrylic
|Weight||Net weight: 35 g approx. (without cable), 85 g approx. (including cable)|
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.