Photoelectric Sensors / Laser Sensors: Compact Photoelectric Sensor CX-400 Ver.2

Model List

Found 168 matches. Display 61 - 75 matches.
Part No.sort ascendingData SheetCE marking directive complianceSensing rangeSensing objectHysteresisRepeatability(perpendicular to sensing axis)Supply voltageCurrent consumptionOutputOutput:Output operationOutput:Short-circuit protectionParts Inventory
   Column active Filter
Close

Filter by CE marking directive compliance

Column active Filter
Close

Filter by Sensing range

Column active Filter
Close

Filter by Sensing object

Column active Filter
Close

Filter by Hysteresis

Column active Filter
Close

Filter by Repeatability(perpendicular to sensing axis)

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Current consumption

Column active Filter
Close

Filter by Output

Column active Filter
Close

Filter by Output:Output operation

Column active Filter
Close

Filter by Output:Short-circuit protection

 
design engineersPanasonicCX-482-J
EMC Directive, RoHS Directive0.1 to 2 m 0.328 to 6.562 ft
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-482-C5
EMC Directive, RoHS Directive0.1 to 2 m 0.328 to 6.562 ft
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-482-C05
EMC Directive, RoHS Directive0.1 to 2 m 0.328 to 6.562 ft
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-482
EMC Directive, RoHS Directive0.1 to 2 m 0.328 to 6.562 ft
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-Z
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-P-Z
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-P-J
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-P-C5
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-P-C05
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-P
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-J
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-C5
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481-C05
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-481
EMC Directive, RoHS Directive50 to 500 mm 1.969 to 19.685 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Ø50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
n/a0.5 mm 0.020 in or less12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less10 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ONIncorporated
design engineersPanasonicCX-444-Z
EMC Directive, RoHS Directiven/an/a2 % or less of operation distance(with white non-glossy paper)n/a12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less20 mA or lessNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Detection-ON or Detection-OFFIncorporated

Pages