Part No: EX-F62-PN-C5
|Sensing object||Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc. |
Note : Highly viscous liquid may not be detected stably.
Note : The agents mentioned above are examples. For details, please contact our office.
Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.
|Supply voltage||12 to 24 V DC ± 10 % Ripple P-P 10 % or less|
|Current consumption||15 mA or less|
|Output||PNP open-collector transistor |
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
|Output:Output operation||In normal state: ON, When leak detected or the sensor is mounted improperly: OFF|
|Response time||50 ms or less|
|FAULT indicator||Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly)|
|NORMAL indicator||Green LED (lights up when the sensor is mounted properly)|
|Ambient temperature||-10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉ |
Note : Liquid being detected should also be kept within the rated ambient temperature range.
|Ambient humidity||35 to 85 % RH, Storage: 35 to 85 % RH|
|Ambient illuminance||Incandescent light: 1,000 ℓx or less at the light-receiving face|
|Emitting element||Infrared LED (non-modulated)|
|Cable extension||Extension up to total 50 m |
|Accessory||MS-EX-F6-2(PVC mounting bracket): 1 pc.|
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.