Photoelectric Sensors / Laser Sensors: Long Range & Wide Area Photoelectric Sensor PX-2

Model List

Found 7 matches. Display 1 - 7 matches.
Part No.sort ascendingData SheetCE marking directive complianceSensing range (OUT 1 and OUT 2 areas) HysteresisSupply voltagePower consumptionOUT1, OUT2OUT1, OUT2:Output operationOUT1, OUT2:Short-circuit protectionResponse timeOperation indicators:OUT 1 areaParts Inventory
   Column active Filter
Close

Filter by CE marking directive compliance

Column active Filter
Close

Filter by Sensing range (OUT 1 and OUT 2 areas)

Column active Filter
Close

Filter by Hysteresis

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Power consumption

Column active Filter
Close

Filter by OUT1, OUT2

Column active Filter
Close

Filter by OUT1, OUT2:Output operation

Column active Filter
Close

Filter by OUT1, OUT2:Short-circuit protection

Column active Filter
Close

Filter by Response time

Column active Filter
Close

Filter by Operation indicators:OUT 1 area

 
design engineersPanasonicPX-SB1
EMC Directive, RoHS Directiven/an/aSupplied from the main sensorn/an/an/an/an/an/a
design engineersPanasonicPX-26
EMC Directive, RoHS Directive5 m 16.404 ft
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
15 % or less of operation distance
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
10 to 31 V DC including rippleUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note:Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)Incorporated80 ms or lessRed LED (lights up when the beam is received in the effective OUT 1 areas)
design engineersPanasonicPX-24ES
EMC Directive, RoHS Directive3 m 9.843 ft
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
15 % or less of operation distance
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
10 to 31 V DC including rippleUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note:Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)Incorporated80 ms or lessRed LED (lights up when the beam is received in the effective OUT 1 areas)
design engineersPanasonicPX-24
EMC Directive, RoHS Directive3 m 9.843 ft
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
15 % or less of operation distance
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
10 to 31 V DC including rippleUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note:Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)Incorporated80 ms or lessRed LED (lights up when the beam is received in the effective OUT 1 areas)
design engineersPanasonicPX-23ES
EMC Directive, RoHS Directive1 m 3.281 ft
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
15 % or less of operation distance
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
10 to 31 V DC including rippleUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note:Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)Incorporated80 ms or lessRed LED (lights up when the beam is received in the effective OUT 1 areas)
design engineersPanasonicPX-22
EMC Directive, RoHS Directive3 m 9.843 ft
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
15 % or less of operation distance
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
10 to 31 V DC including rippleUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note:Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)Incorporated80 ms or lessRed LED (lights up when the beam is received in the effective OUT 1 areas)
design engineersPanasonicPX-21
EMC Directive, RoHS Directive1 m 3.281 ft
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
15 % or less of operation distance
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
10 to 31 V DC including rippleUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note:Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)Incorporated80 ms or lessRed LED (lights up when the beam is received in the effective OUT 1 areas)