Part No: SH-33R
|Applicable amplifiers||SU-7 series|
|Sensing range||2 m 6.562 ft|
|Sensing object||Min. ø1 mm ø0.039 in opaque object (with 2 m 6.562 ft setting distance and at the optimum sensitivity) |
Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.
|Repeatability(perpendicular to sensing axis)||0.1 mm 0.004 in or less|
|Applicable sensor head||n/a|
|Sensing output:Output operation||n/a|
|Sensing output:Short-circuit protection||n/a|
|Self-diagnosis output:Output operation||n/a|
|Self-diagnosis output:Short-circuit protection||n/a|
|Operation indicator||Red LED(lights up when the sensing output of the amplifier is ON, incorporated on the emitter of the thru-beam type sensor head)|
|Test input (emission halt) function||n/a|
|External synchronization function||n/a|
|Remote sensitivity setting function||n/a|
|Remote sensitivity selection function||n/a|
|Sensitivity shift & limit sensitivity setting functions||n/a|
|Automatic interference prevention function||n/a|
|Ambient temperature||-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed) |
Storage: -30 to +70 ℃ -22 to +158 ℉
|Ambient humidity||35 to 85 % RH, Storage: 35 to 85 % RH|
|Ambient illuminance||Incandescent light: 3,500 lx or less at the light-receiving face|
|Vibration resistance||10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each|
|Shock resistance||500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each|
|Emitting element||Red LED (modulated)|
|Emitting element:Peak emission wavelength||680 nm 0.027 mil|
|Material||Enclosure: ABS, Lens: Polycarbonate|
|Cable||0.089 mm2 single core shielded cable, 3 m 9.843 ft long|
|Cable extension||Extension up to total 10 m 32.808 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver).|
|Weight||Emitter: 10 g approx. |
Receiver: 10 g approx.
|Remark||Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.|
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.