NPS-C7

NPS-C7 design engineers Panasonic

Part No: NPS-C7

Specifications

ItemPerformance characteristics
Connectable sensorsPhotoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
Supply voltage100 to 240 V AC±10%
Power consumption6 VA or less
Power supply for sensor : Voltage12 V DC ± 10 % (incorporated with short-circuit protection)
Power supply for sensor : Current150 mA max.
OutputRelay contact 1c
・Switching capacity : 250 V 3 A AC (resistive load)
・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)

NPN open-collector transistor
・Maximum sink current : 100 mA or less
・Applied voltage : 30 V DC or less(between output and 0 V)
・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output : Output operationSwitchable normal operation or inverse operation
Response timeRelay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less
Indicators : PowerRed LED (lights up when the power is ON)
Indicators : Output Red LED (lights up when the output is ON)
Indicators : Sensor signal inputn/a
Indicators : External synchronization inputn/a
External synchronization functionGate trigger
Timer functionn/a
Environmental resistance : Ambient temperature-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Voltage withstandability1,500 V AC for one min. between the power and the output terminals
Environmental resistance : Insulation resistance10 MΩ, or more, with 500 V DC megger between the power and the output terminals
Environmental resistance : Vibration resistance10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
MaterialEnclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
Connecting methodTerminal block
Net weightNet weight: 160 g approx.
AccessoryShort bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.

Parts InventoryParts Inventory

Searching inventory

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

Related Documents

Sensors › Factory Automation Sensors › Sensor Options › ON / OFF Input Sensor Controller NPS › NPS-C7 › Data sheetData Sheet
Sensors › Factory Automation Sensors › Sensor Options › ON / OFF Input Sensor Controller NPS › NPS-C7 › NPSNPS
Sensors › Factory Automation Sensors › Sensor Options › ON / OFF Input Sensor Controller NPS › NPS-C7 › NPS-C7NPS-C7
Sensors › Factory Automation Sensors › Sensor Options › ON / OFF Input Sensor Controller NPS › NPS-C7 › NPS-C7NPS-C7
Sensors › Factory Automation Sensors › Sensor Options › ON / OFF Input Sensor Controller NPS › NPS-C7 › NPS-C7NPS-C7
Sensors › Factory Automation Sensors › Sensor Options › ON / OFF Input Sensor Controller NPS › NPS-C7 › NPS-□NPS-□
Sensors › Factory Automation Sensors › Sensor Options › ON / OFF Input Sensor Controller NPS › NPS-C7 › S-LINK VS-LINK V