Wire-Saving Systems: Picking Switch for Shutter SL-VPK02

Model List

Items per page

153050100

Reset parameters

Found 1 matches. Display 1 - 1 matches.

Part No.	Data Sheet	Supply voltage	Current consumption	Communication specification	Communications mode	Address setting	Lever switch (Input)	Lamp (Output)	Recommended shutter	Ambient temperature	Ambient humidity	Parts Inventory
		Filter Close Filter by Supply voltage 24 V DC ± 10 % (Supplied from a S-LINK V control unit. A separate power supply is also available.)Go	Filter Close Filter by Current consumption 24 V DC line: 25 mA or less (When the lamp is ON) Current for shutter operation: 450 mA or lessGo	Filter Close Filter by Communication specification Complies with S-LINK V protocol.Go	Filter Close Filter by Communications mode B mode, C modeGo	Filter Close Filter by Address setting Input address (lever switch) : 0 to 255Output address (lamp, shutter) : Select an offset of +32, +64, +128, or +256 from the input address.(Note) : Using optional remote controller.Go	Filter Close Filter by Lever switch (Input) 0.079 in or more. (Note) Pulling load is 19.6N or less. Make sure that stress by forcible bend or pulling is not applied directly to the lever part.">Turns ON when lever switch is tilted to angle of 15° to 30° or pulled downward for a distance of about 2 mm 0.079 in or more.(Note) Pulling load is 19.6N or less. Make sure that stress by forcible bend or pulling is not applied directly to the lever part.Go	Filter Close Filter by Lamp (Output) Lamp (LED) color: Selectable from green (default), red, blue or 2-stage indication (green, blue) ・Turns ON when output signal from signal transmission line turns ON.・Turns OFF when output signal from signal transmission line turns OFF.Go	Filter Close Filter by Recommended shutter 0.197 in Maximum weight: 50 g approx. Recommended size: W300 x H210 mm W11.811 x H8.268 in">Material: Danpla (plastic board) Maximum thickness: 5 mm 0.197 inMaximum weight: 50 g approx.Recommended size: W300 x H210 mm W11.811 x H8.268 inGo	Filter Close Filter by Ambient temperature +32 to +122 ℉ (No dew condensation) . Storage: -20 to +60 ℃ -4 to +140 ℉">0 to +50 ℃ +32 to +122 ℉ (No dew condensation) . Storage: -20 to +60 ℃ -4 to +140 ℉Go	Filter Close Filter by Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RHGo
design engineersPanasonicSL-VPK02SL-VPK02	Sensors › Factory Automation Sensors › Wire-Saving Systems › Picking Switch for Shutter SL-VPK02 › SL-VPK02 › Data sheet	24 V DC ± 10 % (Supplied from a S-LINK V control unit. A separate power supply is also available.)	24 V DC line: 25 mA or less (When the lamp is ON) Current for shutter operation: 450 mA or less	Complies with S-LINK V protocol.	B mode, C mode	Input address (lever switch) : 0 to 255 Output address (lamp, shutter) : Select an offset of +32, +64, +128, or +256 from the input address. (Note) : Using optional remote controller.	Turns ON when lever switch is tilted to angle of 15° to 30° or pulled downward for a distance of about 2 mm 0.079 in or more. (Note) Pulling load is 19.6N or less. Make sure that stress by forcible bend or pulling is not applied directly to the lever part.	Lamp (LED) color: Selectable from green (default), red, blue or 2-stage indication (green, blue) ・Turns ON when output signal from signal transmission line turns ON. ・Turns OFF when output signal from signal transmission line turns OFF.	Material: Danpla (plastic board) Maximum thickness: 5 mm 0.197 in Maximum weight: 50 g approx. Recommended size: W300 x H210 mm W11.811 x H8.268 in	0 to +50 ℃ +32 to +122 ℉ (No dew condensation) . Storage: -20 to +60 ℃ -4 to +140 ℉	35 to 85 % RH, Storage: 35 to 85 % RH

Related Documents

Sensors › Factory Automation Sensors › Wire-Saving Systems › Picking Switch for Shutter SL-VPK02 › Picking Switch / Picking Sensor

Sensors › Factory Automation Sensors › Wire-Saving Systems › Picking Switch for Shutter SL-VPK02 › Related Documents › Picking Switch / Picking Sensor