Wire-Saving Systems: Picking Switch SL-VPK01

Model List

Found 1 matches. Display 1 - 1 matches.
Part No.sort descendingData SheetSupply voltageCurrent consumptionCommunications modeAddress settingLever switch (Input)Lamp (Output)Ambient temperatureAmbient humidityMaterialCableParts Inventory
   Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Current consumption

Column active Filter
Close

Filter by Communications mode

Column active Filter
Close

Filter by Address setting

Column active Filter
Close

Filter by Lever switch (Input)

Column active Filter
Close

Filter by Lamp (Output)

Column active Filter
Close

Filter by Ambient temperature

Column active Filter
Close

Filter by Ambient humidity

Column active Filter
Close

Filter by Material

Column active Filter
Close

Filter by Cable

 
design engineersPanasonicSL-VPK01
24 V DC ±10 % (supplied from the S-LINK V control unit. A separate power supply can also be used.)24 V - 0 V line: 25 mA or less (When lamp is on)B mode, C modeInput address (lever switch): 0 to 255
Output address (lamp): Select an offset of +32, +64, +128, or +256 for the input address
(using optional remote controller)
When the lever switch is tilted 15° or more, the input goes ON.
When the lever switch is pulled 1.6 mm 0.063 in, or more, the input goes ON.
Lamp color (LED): Select from green (default), red, blue, and a two-stage indication.
Lamp lights up and turns off when the output signal from the signal transmission line turns on and off, respectively.
0 to +50℃ +32 to +122℉ (No dew condensation),Storage: -20 to +60℃ -4 to +140℉35 to 85 % RH, Storage: 35 to 85 % RHEnclosure: Polycarbonate, Lamp cover: Polycarbonate, Rear case: SGMCC, Pipe mounting holder: Cold rolled carbon steel (SPCC)4-core cabtyre cable, 0.15 m 0.492 ft long (With a male hook-up connector SL-CP2)