Specifications
Item | Performance characteristics |
---|---|
CE Marking Directive Compliance | EMC Directive, RoHS Directive |
Supply Voltage | 12 to 24 V DC +10-15 % Ripple P-P 10 % or less |
Power Consumption | Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
Output | PNP open-collector transistor ・Maximum source current : 100 mA ・Applied voltage : 30 V DC or less (between output and +V) ・Residual voltage : 2 V or less (at maximum source current) |
Output: Output Operation | Switchable either Light-ON or Dark-ON by L/D mode |
Output: Short-Circuit Protection | Incorporated |
Response Time | FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable |
Sensitivity Setting | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
Incident Light Sensitivity Setting | Incorporated, 4 steps |
Incident Light Intensity Display Range | FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999 |
Timer Function | Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective |
Timer Function: Timer Period | Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx., Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx. (Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms. |
Different Frequency Interference Prevention Function | Incorporated (up to 4 units). Note that the response time varies depending on the setting. F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less (Note): This function increases the hysteresis. Check the sensing condition when using the function. |
Protection | IP40(IEC) |
Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉ |
Emitting Element (Modulated) | Red LED (Peak emission wavelength : 660 nm 0.026 mil) |
Material | Enclosure, Case cover : Polycarbonate, Switch : Polyacetal |
Cable | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
Cable Extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
Weight (Typ.) | Net weight : 55 g approx., Gross weight : 90 g approx. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
Directive Compliance | EMC Directive, RoHS Directive |
Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
Shock Resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |