Specifications
| Item | Performance characteristics |
|---|---|
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
| Sensing Range | 10 m 32.808 ft |
| Sensing Object | Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected. |
| Repeatability (Perpendicular to Sensing Axis) | 0.5 mm 0.020 in or less |
| Hysteresis | - |
| Supply Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current Consumption | Emitter: 15 mA or less Receiver: 10 mA or less |
| Output | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
| Output: Output Operation | Switchable either Light-ON or Dark-ON |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | 1 ms or less |
| Operation Indicator | Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
| Stability Indicator | Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
| Power Indicator | Green LED(lights up when the power is ON) (incorporated on the emitter) |
| Sensitivity Adjuster | Continuously variable adjuster(incorporated on the receiver for thru-beam type) |
| Automatic Interference Prevention Function | Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft) |
| Protection | IP67 (IEC) |
| Ambient Temperature | - 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉ |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation Resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration Resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Shock Resistance | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting Element (Modulated) | Red LED |
| Emitting Element (Modulated): Peak Emission Wavelength | 680 nm 0.027 mil |
| Material | Enclosure: PBT (polybutylene terephthalate) Lens: acrylic Indicator cover: acrylic |
| Accessory | - |