Specification

Specifications table for model EX-29A-Y
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Sensing Range 30 to 200 mm 1.181 to 7.874 in
(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.
Sensing Object dia. 15 mm dia. 0.591 in or more opaque or translucent object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.
(Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis-
Repeatability (Perpendicular to Sensing Axis) 0.5 mm 0.020 in or less
Supply Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current Consumption13 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output: Utilization Category DC-12 or DC-13
Output: Short-Circuit ProtectionIncorporated
Response Time0.5 ms or less
Operation Indicator Orange LED (lights up when the output is ON)
Stability IndicatorGreen LED (lights up under stable light received condition or stable dark condition)
ProtectionIP67 (IEC)
Operation Mode Switch -
Sensitivity AdjusterContinuously variable adjuster
Ambient Temperature-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting ElementRed LED (modulated)
Emitting Element: Peak Emission Wavelength680 nm 0.027 mil
MaterialEnclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable ExtensionExtension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Weight (Typ.)Net weight: 20 g approx
Gross weight: 45 g approx
AccessoryAdjusting screwdriver: 1 pc

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.