Amplifier Built-in Ultra-compact Laser Sensor EX-L200

The EX-L200, the one of the world’s smallest Laser Sensors with a built-in amplifier, is designed to detect minute objects with utmost accuracy. Despite its miniature size, the Thru-Beam Type (EX-L211) can detect minute objects with a diameter of just 0.3mm, and the Spot Reflective Type (EX-L221) can even detect gold wire whose diameter is a mere 0.01mm. To facilitate solving application tasks, these sensors come equipped with a Potentiometer and two indicator LEDs. For the Thru-Beam Type, reflective material on the receiver allows users to visualize the laser beam, easing beam-axis alignment.

Characteristics:

Miniature Design
Response Time Only 0.5ms
Visible Red Laser Diode
Sensitivity Adjuster
Available As Thru-Beam, Retroreflective And Spot Reflective Types
Line Spot Type
IP67 Degree Of Protection
2 Indicator LEDs

Models table for series Amplifier Built-in Ultra-compact Laser Sensor EX-L200
Part No.	CE Marking Directive Compliance	Sensing Range	Emission Spot Size (Typical)	Sensing Object	Minimum Sensing Object (Typical)	Hysteresis	Repeatability	Repeatability (Typical) (Perpendicular to Sensing Axis)	Supply Voltage	Current Consumption	Output	Output: Output Operation	Output: Short-Circuit Protection	Response Time	Operation Indicator	Stability Indicator	Power Indicator	Automatic Interference Prevention Function	Sensitivity Adjuster	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Voltage Withstandability	Insulation Resistance	Vibration Resistance	Shock Resistance	Emitting Element	Material	Cable	Cable Extension	Weight (Typ.)	Accessory
EX-L211-P	EMC Directive, RoHS Directive	1 m 3.281 ft	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal) (at a sensing distance of 1 m)	Opaque object of ø2 mm ø0.079 in or more	Opaque object of ø0.3 mm ø0.012 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.01 mm 0.0004 in or less (all area) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	Green LED (lights up when the power is ON) (incorporated on the emitter)		Continuously variable adjuster (incorporated on the receiver)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable (thru-beam type: Total 100 m 328.084 ft both emitter and receiver).	Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212-P	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long		Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L211	EMC Directive, RoHS Directive	1 m 3.281 ft	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal) (at a sensing distance of 1 m)	Opaque object of ø2 mm ø0.079 in or more	Opaque object of ø0.3 mm ø0.012 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.01 mm 0.0004 in or less (all area) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	Green LED (lights up when the power is ON) (incorporated on the emitter)		Continuously variable adjuster (incorporated on the receiver)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable (thru-beam type: Total 100 m 328.084 ft both emitter and receiver).	Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long		Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212-P-J	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate				MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212-J	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate				MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L211-P-J	EMC Directive, RoHS Directive	1 m 3.281 ft	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal) (at a sensing distance of 1 m)	Opaque object of ø2 mm ø0.079 in or more	Opaque object of ø0.3 mm ø0.012 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.01 mm 0.0004 in or less (all area) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	Green LED (lights up when the power is ON) (incorporated on the emitter)		Continuously variable adjuster (incorporated on the receiver)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate				MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L221-P	EMC Directive, RoHS Directive	45 to 300 mm 1.772 to 11.811 in (Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.	ø1 mm ø0.039 in or less (at a sensing distance of 300 mm)	ø1 mm ø0.039 in or less (at a sensing distance of 300 mm)	Gold wire of ø0.01 mm ø0.0004 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.	20 % or less of operation distance	Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.02 mm 0.0008 in or less (at 100 to 200 mm sensing distance) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	15 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less				Incorporated (Two sensors can be mounted close together.)	Continuously variable adjuster	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 2 mW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable.	Net weight: 45 g approx Gross weight: 60 g approx	MS-EXL2-3 (Mounting plate): 1 pc.
EX-L291-P-C5	EMC Directive, RoHS Directive	4 m 13.123 ft (Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical x horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 4 m 13.123 ft, the emission spot size is H 18 x W 10 mm H 0.709 x W 0.394 in (visual reference value).	Opaque translucent object of ø25 mm ø0.984 in or more	-	20 % or less of operation distance	Perpendicular to sensing axis: 0.2 mm 0.0080 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	15 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less				Incorporated (Two sensors can be mounted close together.)	Continuously variable adjuster	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 0.5 mW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable.		RF-330 (Reflector): 1 pc. MS-EXL2-3 (Mounting plate): 1 pc.
EX-L291-C5-Y	EMC Directive, RoHS Directive	4 m 13.123 ft (Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical x horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 4 m 13.123 ft, the emission spot size is H 18 x W 10 mm H 0.709 x W 0.394 in (visual reference value).	Opaque translucent object of ø25 mm ø0.984 in or more	-	20 % or less of operation distance	Perpendicular to sensing axis: 0.2 mm 0.0080 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	15 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less				Incorporated (Two sensors can be mounted close together.)	Continuously variable adjuster	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 0.5 mW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable.

Models table for series Amplifier Built-in Ultra-compact Laser Sensor EX-L200
Part No.	CE Marking Directive Compliance	Sensing Range	Emission Spot Size (Typical)	Sensing Object	Minimum Sensing Object (Typical)	Hysteresis	Repeatability	Repeatability (Typical) (Perpendicular to Sensing Axis)	Supply Voltage	Current Consumption	Output	Output: Output Operation	Output: Short-Circuit Protection	Response Time	Operation Indicator	Stability Indicator	Power Indicator	Automatic Interference Prevention Function	Sensitivity Adjuster	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Voltage Withstandability	Insulation Resistance	Vibration Resistance	Shock Resistance	Emitting Element	Material	Cable	Cable Extension	Weight (Typ.)	Accessory
EX-L211-P	EMC Directive, RoHS Directive	1 m 3.281 ft	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal) (at a sensing distance of 1 m)	Opaque object of ø2 mm ø0.079 in or more	Opaque object of ø0.3 mm ø0.012 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.01 mm 0.0004 in or less (all area) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	Green LED (lights up when the power is ON) (incorporated on the emitter)		Continuously variable adjuster (incorporated on the receiver)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable (thru-beam type: Total 100 m 328.084 ft both emitter and receiver).	Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212-P	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long		Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L211	EMC Directive, RoHS Directive	1 m 3.281 ft	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal) (at a sensing distance of 1 m)	Opaque object of ø2 mm ø0.079 in or more	Opaque object of ø0.3 mm ø0.012 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.01 mm 0.0004 in or less (all area) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	Green LED (lights up when the power is ON) (incorporated on the emitter)		Continuously variable adjuster (incorporated on the receiver)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable (thru-beam type: Total 100 m 328.084 ft both emitter and receiver).	Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long		Net weight: Emitter: 40 g approx., Receiver: 40 g approx., Gross weight: 90 g approx.	MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212-P-J	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate				MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L212-J	EMC Directive, RoHS Directive	3 m 9.843 ft	Approx. 8 × 5.5 mm 0.315 × 0.217 in (vertical × horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 3 m 9.843 ft, the emission spot size is H 17 × W 11 mm H 0.669 × W 0.433 in (visual reference value).	Opaque object of ø3 mm ø0.118 in or more	-		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	-		-	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate				MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L211-P-J	EMC Directive, RoHS Directive	1 m 3.281 ft	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical × horizontal) (at a sensing distance of 1 m)	Opaque object of ø2 mm ø0.079 in or more	Opaque object of ø0.3 mm ø0.012 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.		Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.01 mm 0.0004 in or less (all area) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	Emitter: 10 mA or less Receiver: 10 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less	Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)	Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)	Green LED (lights up when the power is ON) (incorporated on the emitter)		Continuously variable adjuster (incorporated on the receiver)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 390 μW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate				MS-EXL2-2 (Mounting plate): 2 pcs.
EX-L221-P	EMC Directive, RoHS Directive	45 to 300 mm 1.772 to 11.811 in (Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.	ø1 mm ø0.039 in or less (at a sensing distance of 300 mm)	ø1 mm ø0.039 in or less (at a sensing distance of 300 mm)	Gold wire of ø0.01 mm ø0.0004 in (Note)Typical values when the sensitivity adjuster is optimally adjusted.	20 % or less of operation distance	Perpendicular to sensing axis: 0.05 mm 0.0020 in or less	0.02 mm 0.0008 in or less (at 100 to 200 mm sensing distance) (Note)Typical values when the sensitivity adjuster is optimally adjusted.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	15 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less				Incorporated (Two sensors can be mounted close together.)	Continuously variable adjuster	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 2 mW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable.	Net weight: 45 g approx Gross weight: 60 g approx	MS-EXL2-3 (Mounting plate): 1 pc.
EX-L291-P-C5	EMC Directive, RoHS Directive	4 m 13.123 ft (Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical x horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 4 m 13.123 ft, the emission spot size is H 18 x W 10 mm H 0.709 x W 0.394 in (visual reference value).	Opaque translucent object of ø25 mm ø0.984 in or more	-	20 % or less of operation distance	Perpendicular to sensing axis: 0.2 mm 0.0080 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	15 mA or less	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 26.4 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less				Incorporated (Two sensors can be mounted close together.)	Continuously variable adjuster	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 0.5 mW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable.		RF-330 (Reflector): 1 pc. MS-EXL2-3 (Mounting plate): 1 pc.
EX-L291-C5-Y	EMC Directive, RoHS Directive	4 m 13.123 ft (Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.	Approx. 6 × 4 mm 0.236 × 0.157 in (vertical x horizontal) (at a sensing distance of 1 m) (Note) In the case sensing distance is 4 m 13.123 ft, the emission spot size is H 18 x W 10 mm H 0.709 x W 0.394 in (visual reference value).	Opaque translucent object of ø25 mm ø0.984 in or more	-	20 % or less of operation distance	Perpendicular to sensing axis: 0.2 mm 0.0080 in or less	-	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	15 mA or less	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 26.4 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)	Light-ON / Dark-ON selectable by the output operation switching input	Incorporated (short-circuit protection / inverse polarity protection)	0.5 ms or less				Incorporated (Two sensors can be mounted close together.)	Continuously variable adjuster	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition), Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration) (Maximum output: 0.5 mW, Peak emission wavelength: 655 nm 0.026 mil)	Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate	0.15 mm² 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long	Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable.

Amplifier Built-in Ultra-compact Laser Sensor EX-L200

Part Number List