Part Number List

Results 16
Models table for series LF-G Relays
Part No.DatasheetContact TypeContact GapRated Coil VoltageContact ArrangementProtective ConstructionOperating Function Terminal TypeCoil Insulation ClassInsulation DistancePacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage (at 20°C 68°F)Contact ShapeContact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilCoil Holding VoltageOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)DestructiveOver Load Resistive Load
High capacity type
1.5 mm
12V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
117 mA
103 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
31 A 250 V AC
7,750 VA
250 V AC
31 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 31 A, at 20°C)
40 to 80% V (contact carrying current: 31 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 31 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 47 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
High capacity type
1.5 mm
18V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
78 mA
230 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
31 A 250 V AC
7,750 VA
250 V AC
31 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 31 A, at 20°C)
40 to 80% V (contact carrying current: 31 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 31 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 47 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Standard type
1.5 mm
18V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
78 mA
230 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 22 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 30,000 ope. 22 A 250 V AC (at 20 times/min.)
Standard type
1.8 mm
18V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
78 mA
230 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x105 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 22 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 30,000 ope. 22 A 250 V AC (at 20 times/min.)
Standard type
1.8 mm
12V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
117 mA
103 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x105 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 22 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 30,000 ope. 22 A 250 V AC (at 20 times/min.)
Standard type
1.8 mm
9V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
155 mA
58 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x105 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 22 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 30,000 ope. 22 A 250 V AC (at 20 times/min.)
High capacity type
1.8 mm
9V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
155 mA
58 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
33 A 250 V AC
8,250 VA
250 V AC
33 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 33 A, at 20°C)
40 to 80% V (contact carrying current: 33 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x105 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 33 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 50 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Standard type
1.5 mm
9V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
155 mA
58 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
22 A 250 V AC
5,500 VA
250 V AC
22 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 22 A, at 20°C)
40 to 80% V (contact carrying current: 22 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 22 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 35 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 30,000 ope. 22 A 250 V AC (at 20 times/min.)
High capacity type
1.5 mm
24V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
59 mA
410 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
31 A 250 V AC
7,750 VA
250 V AC
31 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 31 A, at 20°C)
40 to 80% V (contact carrying current: 31 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 31 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 47 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
High capacity type
1.8 mm
18V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Class F insulation
[Between contact and coil]
Clearance: Min. 6.5 mm, Creepage: Min. 9.5 mm
50
200
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
78 mA
230 Ω
1400 mW
120% V of Rated coil voltage
Single
AgSnO2 type
33 A 250 V AC
8,250 VA
250 V AC
33 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
6,000 V
35 to 120% V (contact carrying current: 33 A, at 20°C)
40 to 80% V (contact carrying current: 33 A, at 85°C)
Max. 20 ms (at rated coil voltage, without bounce)
Max. 10 ms (at rated coil voltage, without bounce, without diode)
100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 5x105 ope. (at 180 times/min.)
Ambient temperature: –40 to +60°C (When Rated coil voltage applied),
Ambient temperature: –40 to +85°C (When coil holding voltage is 45 to 80% V of rated coil voltage.)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 23 g
Min. 30,000 ope. 33 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)
Min. 50 ope. 50 A 250 V AC (cosΦ = 0.8) (ON : OFF = 0.1 s : 10 s)

What's New

Stay up to date