Specification

Specifications table for model AWHA1C050
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive, UL/c-UL Listing certification, Korea Radio Wave Regulations (Radio Wave Act KC)
Rated Voltage24V DC
Operating Voltage Range 10 to 32 V DC
Note : The voltage tolerance range for maintaining a 10 ms voltage dips is limited to 20.4 to 32 V DC. * Does not include connection of external devices.
Current consumption (at 24 V DC)0.6 A or less
Ambient Temperature-20 to +50 ℃ -4 to +122 ℉ (Note),
Storage -20 to +70 ℃ -4 to +158 ℉
Note : In vertical installation conditions
Ambient Humidity5 to 85% RH (at +25 ℃ +77 ℉, No condensation or icing allowed, Same when storing)
Vibration Resistance5 to 9 Hz, 3.5 mm 0.138 in single amplitude, 9 to 150 Hz, Acceleration 9.8 m/s2 (1 G)
Shock Resistance490 m/s2 (50 G), 11 ms, 3 times in the X, Y, Z directions
ProtectionFront panel: IP66 (Initial value) (Note), Rear: IP20
Note : The IP66 is guaranteed only if:
・Max deviation from the plane surface to the cut-out: ≤ 0.5 mm 0.020 in
・Thickness of the case where is mounted the equipment: from 1.5 mm to 6 mm 0.059 in to 0.236 in
・Max surface roughness where the gasket is applied: ≤ 120 μm
Also, tightening torque: 0.75 N•m (for advanced type: 1.3 N•m) or screw each fixing screw until the bezel corner gets in contact with the panel.
Pollution Degree 2
Net Weight 1 kg approx.
Displayable fontsFixed font, True Type font, Fonts installed in Windows®
Note : Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Note : A license (permission to use) is required to add the font.
Number of registerable screens (pages)Max. 1,000
Note : Maximum allowable number varies depending on registered contents.
Registerable screen numberPages: 1,000
Dialog: 50
Template: 50
Types of widgetBasic (text, numerics), Button, Meter, Switch, Light, Media, Icon, Custom, etc.
Main FunctionsTrends, Reports, Alarms, Scheduler, Database, Data transfers, Recipe, Keypads, Web Server, etc.
Through functionIf a PC is connected to the LAN port of a WH series and a PLC is connected into the serial port, the PLC program can be debugged without a direct connection between the computer and the PLC.
Note : The only supported PLC is our FP series.
Display : Display unit5 inch wide TFT
Note : On the LCD panel, bright spots (points always lit) or black spots (points always unlit) may appear, or the uneven brightness, flickers or crosstalk (appearance of unintended shades in the area no graphic or part is arranged) may occur depending on the operating conditions.
Note that these phenomena are resulted from the basic characteristics of LCD panel not defects or failures of the product.
Display : Resolution800×480, WVGA
Display : Colors65,536 colors
Display : BacklightWhite LED
Display : Backlight brightness (Initial)300 cd/m2(typ.)
Display : DimmingYes (Can be adjusted on the menu screen, xAscender Studio settings.
*There are some minor variations in the backlight brightness.
Display : Backlight life time40,000 hours or more
Note : Time of continuous operation until the brightness of the backlight reaches 50% of the rated value when the surrounding air temperature is +25 ℃ +77 ℉
Touch switch : Touch switchCapacitive type
Touch switch : Touch switch operating-
Touch switch : Life time-
Memory space : RAM512 MB
Memory space : Flash memory4 GB
Memory space : Project memory240 MB
Memory space : User memory512 MB
RTC/Backup : Clock functionYes
RTC/Backup : Accuracy RTC±100 ppm or less (at +25 ℃ +77 ℉)
Note : At +25 ℃ +77 ℉: less than 260 seconds per month. On systems prone to clock error, set the correct time on a regular basis.
RTC/Backup : Backup rangeClock back up
RTC/Backup : Backup function / period3 months with lithium batteries (secondary batteries)
(at +25 ℃ +77 ℉)
Note : Must be charged for 48 hours. When the battery is fully charged, it ensures a period of 48 hours of data backup.
OtherBuzzer
Number of Communication Ports1 port *Can be switched with xAscender Studio
Baud Rate100 Mbps / 10 Mbps, Auto negotiation
Note : Switching between different speeds is done automatically by auto negotiation function.
Connecter shapeRJ-45
Note : Be careful not to apply excessive static electricity to the metal parts of the connector.
Cable total length100 m 328.084 ft (500 m 1,640.42 ft when using a repeater)
Note : The maximum length of the cable is 100 m 328.084 ft in accordance with the standards, but depending on the operating environment, a ferrite core may be installed to reduce noise. May be required. It is also recommended that the hub be installed near the control panel and that it be used at 10 m 32.808 ft or less.
Communication CableUTP cable (Category 5 or higher)
Ber Of Simultaneous ConnectionsMax. 4
dFull-duplex / Half-duplex
lTCP/IP, UDP/IP
DNSName server support
DHCPCorrespondence of automatic IP address acquisition
FTP server/ClientServer function: Transfer file / Client function: Transfer data and file
HTTP server / clientServer function: Customer web / Client function: Web browser
SNTPCorrespondence of time setting function
Communication standardConforms to RS-232C (Non insulation type)
Conforms to RS-422 / RS-485 (Non insulation type)
Conditions for communication with external devices : Baud rate1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bit/s
Note : Communication conditions depend on the communications state of PLCs or other slave devices. Please check with the actual devices when some commercial devices with RS485 interface are connected. The number of connected devices, transmission distance, and transmission speed may be different according to using transmission line.
Conditions for communication with external devices : Data bits7 bits / 8 bits
Conditions for communication with external devices : Paritynone / even / odd
Conditions for communication with external devices : Stop bit1 bit / 2 bit
Transmission distance (Total length)RS-232C : Max. 15 m 49.213 ft(Baud rate: 19,200 bps)
RS-422 / RS-485 : Max. 500 m 1,640.42 ft (Baud rate: 115.2 kbps)
Terminal resistanceRS-232C : -
RS-422 / RS-485 : No termination
Note : When connected to the termination, it is recommended that a 120Ω, 1/2W or better termination resistor be connected between the communication lines.
ConnectorConnector supplied with advanced model
Number of ports1 port
Electrical specificationsComplies with USB 2.0
Connector shapeUSB Type A
Note : Take care of handling of the connector not to add an excessive static electricity on the metal part of the connector.
Note : The format of the external memory should be in FAT32 or FAT. The max number of files inside external memory depends on the type of formatting.
• FAT32: Max. 65,535 files • FAT: Max. 512 files
Transmission Speed 480 Mbps (High speed mode)
Maximum currentMax. 500 mA
Support MediaSD memory card, SDHC memory card
Note : Industrial or business use SD memory cards (SLC type) are recommended. Check the operating temperature range of the SD memory card before use.
upported format standardConforms to SD standard (Note)
(Please format with a format software for SD memory cards.)
Note : The format of the external memory should be in FAT32 or FAT. The max number of files inside external memory depends on the type of formatting.
• FAT32: Max. 65,535 files • FAT: Max. 512 files
Dummy109 × 65.8 mm
4.291 × 2.591 in

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date