The galvano controller and algorithm are designed to achieve optimum balance with the galvano scanner and mirror housed in the compact head. They provide beautiful and stable marking results even when the laser marking is conducted at high speed.
Duplicate interlock circuit
The interlock circuit using a contactor features a duplicate configuration. It reliably shuts off the laser power source unit in the event an abnormality occurs. In addition, the LP-RF series is complete with safety features such as the broken line notification function and erroneous irradiation detection function.
Yb fiber laser; λ= 1,064 nm 0.0419 mil Class4 laser
17 W (±5 %) Pulse oscillation (Note)This indicates the output power at processing point when maximum power is set. (Factory default)
Red semiconductor laser; λ= 655 nm 0.026 mil; Class 2 laser: Maximum output 1 mW or less
Galvano scanning method
90 mm × 90 mm 3.543 in × 3.543 in
190 mm 7.480 in (Note)There may be an individual difference of approximately ±0.5 mm ±0.02 in in the work distance.
Maximum 12,000 mm/sec. 472.441 in/sec. (Note1)The indicated values show the allowable setting range. The setting values that can maintain the marking / processing quality vary depending on the marking condition and target material. (Note2)Depending on the setting data, the scan speed may be subject to upper-limit restriction in some cases.
Maximum 240 m/min. 787.402 ft/min. (Note)Depending on the setting data, the scan speed may be subject to upper-limit restriction in some cases.
English uppercase letters, English lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50), True type