Programmable Logic Controllers (PLC): FP0H

Model List

Found 4 matches. Display 1 - 4 matches.
Part No.sort descendingData Sheet[[Control specifications]]Number of controllable I/O points[[Control specifications]]Programming method / Control method[[Control specifications]]Program memory[[Control specifications]]Number of instructions : Basic instructions [[Control specifications]]Number of instructions : High-level instructions[[Control specifications]]Program capacity[[Control specifications]]Operation speed[[Control specifications]]Base scan time
I/O refresh and base time
[[Control specifications]]Operation memory : Relay : External input (X) [[Control specifications]]Operation memory : Relay : External output (Y)Parts Inventory
   Column active Filter
Close

Filter by [[Control specifications]]Number of controllable I/O points

Column active Filter
Close

Filter by [[Control specifications]]Programming method / Control method

Column active Filter
Close

Filter by [[Control specifications]]Program memory

Column active Filter
Close

Filter by [[Control specifications]]Number of instructions : Basic instructions

Column active Filter
Close

Filter by [[Control specifications]]Number of instructions : High-level instructions

Column active Filter
Close

Filter by [[Control specifications]]Program capacity

Program capacity DT Number of word
24k steps
32k steps(initial value)
40k steps
64k steps
65,533 words
32,765 words(initial value)
24,573 words
12,285 words
">24 k /32 k /40 k / 64 k steps Can be selected at system register No. 0 When the program capacity is changed, the number of words that can be used in the data register (DT) is also changed. Program capacity DT Number of word 24k steps32k steps(initial value)40k steps64k steps 65,533 words32,765 words(initial value)24,573 words12,285 words
Column active Filter
Close

Filter by [[Control specifications]]Operation speed

Column active Filter
Close

Filter by [[Control specifications]]Base scan timeI/O refresh and base time

Column active Filter
Close

Filter by [[Control specifications]]Operation memory : Relay : External input (X)

Column active Filter
Close

Filter by [[Control specifications]]Operation memory : Relay : External output (Y)

 
design engineersPanasonicAFP0HC32P
32 points (Input: 16, Output: 16), When expanded: Max. 384 pointsRelay symbol / Cyclic operationBuilt-in flash ROM (no backup battery required)120 types approx.240 types approx.24 k /32 k steps
Can be selected at system register No. 0
When the program capacity is changed, the number of words that can be used in the data register (DT) is also changed.
Program capacity DT Number of word
24k steps
32k steps(initial value)
65,533 words
32,765 words(initial value)
Basic instruction (NOT: /) : 10 ns/step approx. (Up to 10 k steps) ,0.18 μs/step approx. (10 k steps and later)
Basic instruction (ST) : 40 ns/step approx. (Up to 10 k steps) ,0.65 μs/step approx. (10 k steps and later)
High-level instruction (FOMV) : 0.14 μs/step approx. (Up to 10 k steps) , 1.2 μs/step approx. (10 k steps and later)
Control unit: 40 μs or less approx. and FP0 / FP0R expanshion unit refresh time (Note)
Note : Refresh times for FP0 / FP0R expansion units
8 points unit : Number of units×0.8ms
16 points unit : Number of units×1.0ms
32 points unit : Number of units×1.3ms
64 points unit : Number of units×1.9ms
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.
design engineersPanasonicAFP0HC32T
32 points (Input: 16, Output: 16), When expanded: Max. 384 pointsRelay symbol / Cyclic operationBuilt-in flash ROM (no backup battery required)120 types approx.240 types approx.24 k /32 k steps
Can be selected at system register No. 0
When the program capacity is changed, the number of words that can be used in the data register (DT) is also changed.
Program capacity DT Number of word
24k steps
32k steps(initial value)
65,533 words
32,765 words(initial value)
Basic instruction (NOT: /) : 10 ns/step approx. (Up to 10 k steps) ,0.18 μs/step approx. (10 k steps and later)
Basic instruction (ST) : 40 ns/step approx. (Up to 10 k steps) ,0.65 μs/step approx. (10 k steps and later)
High-level instruction (FOMV) : 0.14 μs/step approx. (Up to 10 k steps) , 1.2 μs/step approx. (10 k steps and later)
Control unit: 40 μs or less approx. and FP0 / FP0R expanshion unit refresh time (Note)
Note : Refresh times for FP0 / FP0R expansion units
8 points unit : Number of units×0.8ms
16 points unit : Number of units×1.0ms
32 points unit : Number of units×1.3ms
64 points unit : Number of units×1.9ms
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.
design engineersPanasonicAFP0HC32EP
32 points (Input: 16, Output: 16), When expanded: Max. 384 pointsRelay symbol / Cyclic operationBuilt-in flash ROM (no backup battery required)120 types approx.270 types approx.24 k /32 k /40 k / 64 k steps
Can be selected at system register No. 0
When the program capacity is changed, the number of words that can be used in the data register (DT) is also changed.
Program capacity DT Number of word
24k steps
32k steps(initial value)
40k steps
64k steps
65,533 words
32,765 words(initial value)
24,573 words
12,285 words
Basic instruction (NOT: /) : 10 ns/step approx. (Up to 10 k steps) ,0.18 μs/step approx. (10 k steps and later)
Basic instruction (ST) : 40 ns/step approx. (Up to 10 k steps) ,0.65 μs/step approx. (10 k steps and later)
High-level instruction (FOMV) : 0.14 μs/step approx. (Up to 10 k steps) , 1.2 μs/step approx. (10 k steps and later)
Control unit: 100 μs or less approx. and FP0 / FP0R expanshion unit refresh time (Note)
Note : Refresh times for FP0 / FP0R expansion units
8 points unit : Number of units×0.8ms
16 points unit : Number of units×1.0ms
32 points unit : Number of units×1.3ms
64 points unit : Number of units×1.9ms
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.
design engineersPanasonicAFP0HC32ET
32 points (Input: 16, Output: 16), When expanded: Max. 384 pointsRelay symbol / Cyclic operationBuilt-in flash ROM (no backup battery required)120 types approx.270 types approx.24 k /32 k /40 k / 64 k steps
Can be selected at system register No. 0
When the program capacity is changed, the number of words that can be used in the data register (DT) is also changed.
Program capacity DT Number of word
24k steps
32k steps(initial value)
40k steps
64k steps
65,533 words
32,765 words(initial value)
24,573 words
12,285 words
Basic instruction (NOT: /) : 10 ns/step approx. (Up to 10 k steps) ,0.18 μs/step approx. (10 k steps and later)
Basic instruction (ST) : 40 ns/step approx. (Up to 10 k steps) ,0.65 μs/step approx. (10 k steps and later)
High-level instruction (FOMV) : 0.14 μs/step approx. (Up to 10 k steps) , 1.2 μs/step approx. (10 k steps and later)
Control unit: 100 μs or less approx. and FP0 / FP0R expanshion unit refresh time (Note)
Note : Refresh times for FP0 / FP0R expansion units
8 points unit : Number of units×0.8ms
16 points unit : Number of units×1.0ms
32 points unit : Number of units×1.3ms
64 points unit : Number of units×1.9ms
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.
1, 760 points (X0 to X109F)(Note 1, 2)
Note 1 : The number of points that can be used depends on the combination of hardware.
Note 2 : Some specifications are compatible with FPΣ.