Part Number List

Results 2
Models table for series Bank Selection Unit FX-CH
Part No.DatasheetSupply voltageCurrent consumptionBank Selection InputPower indicatorTransmission operation indicatorAmbient TemperatureAmbient HumidityVoltage withstandabilityInsulation resistanceVibration resistanceShock resistanceMaterialConnection methodCable LengthWeight (Typ.)Accessory
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
25 mA or less (When all indicators light up)
High: 4 V to +V DC (Sink current: 0.5 to 3 mA Input impedance: 10 kOhm approx.)
Low: 0 to 0.6 V DC, or open
Green LED (Lights up when the power is ON)
Green LED (Lights up when loaded, blinks to lights up when saved)
-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
Enclosure: Heat-resistant ABS
Connector
(Note) The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 20 g approx.
Gross weight: 25 g approx.
SL-CP1 (4-pin type snap male connector): 1 pc.
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
25 mA or less (When all indicators light up)
Low: 0 to 2 V DC (Source current: 0.5 mA Input impedance: 10 kOhm approx.)
High: 5 V to +V DC, or open
Green LED (Lights up when the power is ON)
Green LED (Lights up when loaded, blinks to lights up when saved)
-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
Enclosure: Heat-resistant ABS
Connector
(Note) The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 20 g approx.
Gross weight: 25 g approx.
SL-CP1 (4-pin type snap male connector): 1 pc.